Panasonic AW-RP605P Operating Instructions Manual

Also see for AWRP605P - MULTI FUNCTION CONTROLLER: Operating instructions

Contents

35Operation$ Preset memory settingsThe multi-function controller is equipped with a presetmemory function for entering the positions and settings withwhich the pan-tilt head system is to shoot.Preset memory data is entered into TRACING/PRESETMEMORY buttons 1 through 50.1. Select the pan-tilt head system using theCONTROL/PREVIEW MONITOR OUT SEL button.2. Connect a color monitor to the VIDEO/Y OUT connectoron the main unit that corresponds to the pan-tilt headsystem currently selected.3. Use the following buttons to establish the modes.O Press the IRIS button to establish the MANU mode(the IRIS button’s lamp now goes off).If the AUTO mode is established, the lens iris positionwill not be entered.O Press the TR/PSET button to establish the presetmemory mode (the TR/PSET button’s lamp now goesoff).O If the M.LOCK button’s lamp lights, press theM.LOCK button to establish the memory entry mode(the M.LOCK button’s lamp now goes off).4. Operate the ZOOM lever and PAN/TILT lever, and onthe monitor check the pictures which are to be shot.5. Select the white balance from among the A, B and ATWbuttons, and adjust the lens iris using the FOCUS/IRISdial.6. Set the unit to a state in which the MEMORY button isheld down.When the MEMORY button is pressed, those buttonsamong the TRACING/PRESET MEMORY buttons 1through 50 in which data can be entered start flashing insequence.If a button has a lamp that remains off, it means thatdata has already been entered into it. Preset memorydata cannot be entered into it.7. While the MEMORY button is held down, press thebutton in which the preset memory data is to be entered.8. If necessary, enter other shooting positions and settingsinto other buttons among TRACING/PRESET MEMORYbuttons 1 through 50 as preset memory data.9. Select the next pan-tilt head system using theCONTROL/PREVIEW MONITOR OUT SEL button, andcontinue setting the preset memory data for each systemconcerned.Entering preset memory data CONTROL/PREVIEW MONITOR OUT SELAUX1 2 3 4 5TALLYTRACING MEMORYLAMPMENULIMITOFFLIMITONFULLEMPTYOKLCDCONTRASTCAMERACONTROLSTARTPOINTR/BGAIN/PEDWHITEBAL AWCGAINMODECLOSE WIDE NEARDATA SETTR/PSET M.LOCKMEMORYIRISIRISIRISOPEN ZOOMTELE FOCUSFARCALLINCOMLEVELFOCUSOPENFARTELEOFFONOPERATEWIDEZOOM/FOCUS/IRISABCATWAB NGOKSTART/STOP RESTORE RESETDEF WIP H/F EXT ND OPTIONPAN/TILT SETCAMERA CONTROLTRACING/PRESET MEMORYIRISSPEEDPRIORITYFOCUSBARCAMTRPSETLOWHIGHAUTOMANUAUTOMANULOCK1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 2021 22 23 24 25 26 27 28 29 13031 32 33 34 35 36 37 38 39 4041 42 43 44 45 46 47 48 49 50DOWNPAN/TILT/FOCUS/IRISUPL RCLOSENEAR OPENFARCLOSENEAR3 5 4 4(5)3 3 156•7