Panasonic AW-RP605P Operating Instructions Manual

Also see for AWRP605P - MULTI FUNCTION CONTROLLER: Operating instructions

Contents

8P START POINT buttonPress this to set the position at which the tracing memoryis to be started.Q START/STOP buttonPress this to start or stop entry into the tracing memory.R RESTORE buttonPress this to correct or change what has been entered inthe tracing memory.S RESET buttonPress this to erase what has been entered in the tracingmemory.T TR/PSET buttonThis is used to select the tracing memory mode or presetmemory mode.Each time it is pressed, the tracing memory mode orpreset memory mode is selected in turn.When the tracing memory mode is selected, the button’slamp comes on; when the preset memory mode isselected, the lamp goes off.U M.LOCK buttonThis is used to disable or enable the recording of settingsin the tracing memory or preset memory.Each time it is pressed, recording disable or enable isselected in turn.When recording is disabled, the button’s lamp comes on;when it is enabled, the lamp goes off.V MEMORY buttonThis is pressed when the pan-tilt head system’s settingsare to be entered as a preset memory into one of theTRACING/PRESET MEMORY buttons [1] through [50].Up to 50 settings can be entered per pan-tilt head systeminto a preset memory.Pan-tilt head system’s settingsHow to enter settings into the preset memoryW TRACING/PRESET MEMORY buttons [1] to [50]Tracing memory or preset memory data is entered intothese buttons.Tracing memory: [1] through [10]Preset memory : [1] through [50]It is not possible to enter preset memory data into anybutton in which a tracing memory has already beenentered.1 Select the pan-tilt head system using theCONTROL/PREVIEW MONITOR OUT SEL button.2 Select the preset memory mode using theTP/PSET button.3 Set the pan-tilt head system.4 While pressing the MEMORY button, press one ofthe TRACING/PRESET MEMORY buttons from [1]through [50] into which the settings are to beentered.Pan-tilt head:Pan-tilt positionCamera:Zoom, focus, iris, white balanceParts and their functions$ Control panelCONTROL/PREVIEW MONITOR OUT SELAUX1 2 3 4 5TALLYTRACING MEMORYLAMPMENULIMITOFFLIMITONFULLEMPTYOKLCDCONTRASTCAMERACONTROLSTARTPOINTR/BGAIN/PEDWHITEBAL AWCGAINMODECLOSE WIDE NEARDATA SETTR/PSET M.LOCKMEMORYIRISIRISIRISOPEN ZOOMTELE FOCUSFARCALLINCOMLEVELFOCUSOPENFARTELEOFFONOPERATEWIDEZOOM/FOCUS/IRISABCATWAB NGOKSTART/STOP RESTORE RESETDEF WIP H/F EXT ND OPTIONPAN/TILT SETCAMERA CONTROLTRACING/PRESET MEMORYIRISSPEEDPRIORITYFOCUSBARCAMTRPSETLOWHIGHAUTOMANUAUTOMANULOCK1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 2021 22 23 24 25 26 27 28 29 13031 32 33 34 35 36 37 38 39 4041 42 43 44 45 46 47 48 49 50DOWNPAN/TILT/FOCUS/IRISUPL RCLOSENEAR OPENFARCLOSENEARPT U WV Q R S