Panasonic AW-RP605P Operating Instructions Manual

Also see for AWRP605P - MULTI FUNCTION CONTROLLER: Operating instructions

Contents

41 OPERATE lampThis comes on when power is supplied to the main unitand both the DC POWER switch on the main unit and theOPERATE switch on the control panel are set to ON.It goes off when either switch is set to OFF.It flashes when a disconnection or some other problemhas occurred with the cable which is used to connect themain unit and control panel.2 OPERATE switchThis is used to control the power supply of all the pan-tilthead systems (each of which consists of a pan-tilt headand convertible camera) which have been connected tothe main unit.3 INCOM connectorThe headset for inter-communications purposes isconnected here.4 LEVEL controlThis is used to adjust the volume of the headset’sreceiver.5 CALL buttonWhen this button is pressed, the buzzers on the otherconnected control panels sound, and the CALL button’slamp comes on.6 IRIS [AUTO/MAN/LOCK] buttonThis is used to select how to adjust the lens iris of thepan-tilt head system currently selected.Each time it is pressed, the AUTO, MANU or LOCKsetting is selected in turn.AUTO : The lens iris is adjusted automatically, and theIRIS button’s lamp comes on. If the FOCUS/IRISdial for adjusting the iris is rotated when AUTOhas been selected, the IRIS button’s lamp flashesas a warning.MANU : The lens iris is adjusted manually using theFOCUS/IRIS dial.At this setting, the IRIS button’s lamp goes off.LOCK : The lens iris is fixed at the position where it wasadjusted manually, and the IRIS button’s lampflashes.At the LOCK setting, the position of the lens iriswill not be changed even if the FOCUS/IRIS dialis turned.Set the button to the MANU position when entering thelens iris position in the TRACING/PRESET MEMORYbutton.7 IRIS indicatorThis indicates the lens iris position of the pan-tilt headsystem currently selected using 12 steps (from CLOSE toOPEN).8 ZOOM indicatorThis indicates the lens zoom position of the pan-tilt headsystem currently selected using 12 steps (from WIDE toTELE).9 FOCUS indicatorThis indicates the lens focus position of the pan-tilt headsystem currently selected using 12 steps (from NEAR toFAR).Parts and their functions$ Control panelCONTROL/PREVIEW MONITOR OUT SELAUX1 2 3 4 5TALLYTRACING MEMORYLAMPMENULIMITOFFLIMITONFULLEMPTYOKLCDCONTRASTCAMERACONTROLSTARTPOINTR/BGAIN/PEDWHITEBAL AWCGAINMODECLOSE WIDE NEARDATA SETTR/PSET M.LOCKMEMORYIRISIRISIRISOPEN ZOOMTELE FOCUSFARCALLINCOMLEVELFOCUSOPENFARTELEOFFONOPERATEWIDEZOOM/FOCUS/IRISABCATWAB NGOKSTART/STOP RESTORE RESETDEF WIP H/F EXT ND OPTIONPAN/TILT SETCAMERA CONTROLTRACING/PRESET MEMORYIRISSPEEDPRIORITYFOCUSBARCAMTRPSETLOWHIGHAUTOMANUAUTOMANULOCK1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 2021 22 23 24 25 26 27 28 29 13031 32 33 34 35 36 37 38 39 4041 42 43 44 45 46 47 48 49 50DOWNPAN/TILT/FOCUS/IRISUPL RCLOSENEAR OPENFARCLOSENEAR7 8 9512346The IRIS, ZOOM and FOCUS indicator displays may notappear depending on the model of pan-tilt head andcamera used.Contact your local dealer for details.