Panasonic AW-UE150WP Operating Instructions Manual

Also see for AW-UE150KE: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

ELC Limit [1/100, 1/120, 1/250]Set the maximum shutter level when ELC is operating.Factory settings: 1/250Gain[When [Super Gain] is [Off]: Auto, 0dB to 36dB,When [Super Gain] is [On]: Auto, 0dB to 42dB]The image gain is adjusted here.In locations which are too dark, adjust the gain upward; conversely, inlocations which are too bright, adjust it downward.When [Auto] is set, the light quantity is adjusted automatically.The noise increases when the gain is increased.Factory settings: 0dBSuper Gain [Off, On]Set the super gain (increased sensitivity) mode.Off Do not set super gain mode.On Set super gain mode.Factory settings: OffAGC Max Gain [6dB, 12dB, 18dB]When [Auto] is selected as the [Gain] setting, the maximum gain-upamount can be set.Factory settings: 18dBFrame Mix [Off, 6dB, 12dB, 18dB, 24dB]Select for frame addition (gain-up using sensor storage) amount.Its setting takes effect when [Off] has been selected as the [ShutterMode] setting (→ page 101).When frame addition is performed, it will appear as if the images aremissing some frames.This cannot be configured when the format is 2160/29.97p,2160/23.98p, 2160/24p, 2160/25p, 1080/29.97p, 1080/23.98p(59.94i),1080/23.98p, 1080/24p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p or1080/25PsF.Factory settings: Off• Under discharge tube illumination, such as fluorescent and mercury-vapor lights, the brightness may change synchronously, colors maychange, and horizontal stripes may flow up and down the image.ND Filter [Through, 1/4, 1/16, 1/64]Set the transmittance of the lens' built-in ND (neutral density) filter.The filter switches when the setting is fixed.Through Do not set ND filter.1/4 Set ND filter transmittance to 1/4.1/16 Set ND filter transmittance to 1/16.1/64 Set ND filter transmittance to 1/64.Factory settings: ThroughDay/Night[Day, Night]Switch between standard shooting and night-vision shooting (shootingwith infrared light).Day Standard shooting (day mode)Night Night-vision shooting (night mode)Factory settings: Day• In night mode, video output will be in black and white. In addition,the iris will be forcibly opened.• White balance adjustment is not possible in night mode.• ND filter switching is not possible in night mode.• [Pedestal] cannot be performed properly in night mode.z Picture102Web screen configurations (continued)