Getting Started303 Troubleshooting3.1 General IssuesIssue Causes and SolutionsThe unit doesn’t turn on. Is it plugged in correctly?The remote controldoesn’t work.Are the batteries good and installed correctly?Is the remote control receptor in direct sunlight?Is there an obstruction (including colored glass in arack door) between the remote control and thereceptor?Is the mode switch on the back of the BL-WV10 setto SEQ. DISP.?• Set the mode switch to NORMAL and turn thepower on again.The remote controldoesn’t turn the TV on.Is the power button for the TV turned on?Is the correct manufacturer code set for the remotecontrol?The unit doesn’t seem towork.Is the power indicator flashing red?Did the buzzer sound 3 or more times?• Remove the power cord from the AC adaptorand re-insert it. If this doesn’t resolve theproblem, contact your dealer.I forgot the administratorpassword and/or securitycode.Reset the BL-WV10 to its default settings.• With the power on, press and hold theFACTORY DEFAULT RESET button at theback of the BL-WV10 with a paper clip tip orsimilar object for 3 seconds.[Application] or [CGI] arenot displayed in the[Status] tab on the [LocalCamera Setup] screen.Return to the camera list, select the camera again,then select [Status].
