Panasonic CS-DZ50VKE Service Manual

Also see for CS-DZ25VKE: Operating instructions Operating instructions

Contents

Panasonic CS-DZ50VKE Service Manual Manual pdf 52 page image

5212.2 Indoor Unit12.2.1 How to Fix Installation PlateThe mounting wall shall be strong and solid enough to prevent it from vibration.Model Dimension1 2 3 4 5 6PZ25***, UZ25***, DZ25***PZ35***, UZ35***, DZ35*** 480 mm 90 mm 425 mm 425 mm 43 mm 95 mmModel Dimension1 2 3 4 5 6PZ50***, UZ50***,DZ50*** 490 mm 85 mm 439 mm 432 mm 43 mm 95 mmThe center of installation plate should be at more than 1 at right and left of the wall.The distance from installation plate edge to ceiling should more than 2.From installation plate center to unit’s left side is 3.From installation plate center to unit’s right side is 4.B : For left side piping, piping connection for liquid should be about 5 from this line.: For left side piping, piping connection for gas should be about 6 from this line.1 Mount the installation plate on the wall with 5 screws or more (at least 5 screws).(If mounting the unit on the concrete wall, consider using anchor bolts.)o Always mount the installation plate horizontally by aligning the marking-off line with the thread and usinga level gauge.2 Drill the piping plate hole with ø70 mm hole-core drill.o Line according to the left and right side of the installation plate.The meeting point of the extended line is the center of the hole.Another method is by putting measuring tape at position as shown in the diagram above.The hole center is obtained by measuring the distance namely 128 mm for left and right holerespectively.o Drill the piping hole at either the right or the left and the hole should be slightly slanting to the outdoorside.3 4BACCeilingWall WallInstallationplate 12 screwMore than 1 More than 1Measuring TapeIndoor unit228 mm128 mm228 mm128 mmMore than 2For best strength ofINDOOR unit installation,it is highly recommendedto locate “ ” at 5 positionas shown.PIPEHOLECENTERPIPEHOLECENTER128mm TOPIPE HOLECENTER128mm TOPIPE HOLECENTER3 4BACCeilingWall WallInstallationplate 12 screwMore than 1 More than 1Measuring TapeIndoor unit241.5 mm128 mm241.5 mm128 mmMore than 2For best strength ofINDOOR unit installation,it is highly recommendedto locate “ ” at 5 positionas shown.PIPEHOLECENTERPIPEHOLECENTER128mm TOPIPE HOLECENTER128mm TOPIPE HOLECENTER