88 Sleep operation will not undergo temperature shift when it collaborate with below operation. However, it willexecute the delay timer.o Powerful mode operationo Auto mode operationStop Condition: When sleep operation is cancel by pressing respective button until sleep timer reaches 0.0h. ON/OFF button is pressed. When sleep operation ends.14.7 Random Auto Restart Control When the power supply is cut off during the operation of air conditioner, the compressor will re-operate withinthree to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to beselected randomly) after power supply resumes. This type of control is not applicable during ON/OFF Timer setting. This control can be omitted by open the circuit of JP1 at indoor unit printed circuit board.14.8 Indication PanelLED POWER TIMERColor Green OrangeLight ON Operation ON Timer Setting ONLight OFF Operation OFF Timer Setting OFFNote: If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operationmode judgment, or ON timer sampling. If Timer LED is blinking, there is an abnormality operation occurs.14.9 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)A. PurposeTo provide quiet cooling operation compare to normal operation.B. Control conditiona. Quiet operation start conditiono When “POWERFUL/QUIET” button at remote control is pressed twice. QUIET will be shown on remotecontrol display.b. Quiet operation stop condition1 When one of the following conditions is satisfied, quiet operation stops:a. POWERFUL/QUIET button is pressed again.b. Stop by OFF/ON switch.c. Timer “off” activates.d. When FAN SPEED button is pressed.2 When quiet operation is stopped, operation is shifted to normal operation with previous setting.3 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.4 During quiet operation, if timer “on” activates, quiet operation maintains.5 After off, when on back, quiet operation is not memorized.C. Control contents1 Fan speed is changed to Lo-.