Panasonic CZ-256ESMC3 Technical Data Manual

Also see for CZ-256ESMC3: Quick reference Operating instructions

ー 103 ーOperating Instructions Intelligent Controller114Displaying data in graphsEnergy saving5 Touch [DispItem set].z The “DispItem set” screen is displayed.56 Select how to display.z Refer to P.106 for information about how to display.6(The following explains using examples as if “ItemUnts” was selected)7 Select the unit.z Refer to P.106 for information about units.78 Select the type of data.z Refer to P.107 for information about types of data.z If you have selected [days] for the display period, this isnot set.89 Select the item.z Refer to P.107 for the items you can set.z You can select one item only.z If you have selected [By unit] as the display method, theitems are fixed so there is no need for you to set them.910 Select the device name.z You can set the device name for only one device.z If you have selected [ItemUnts] as the display method, youcan set up to 4 device names.10Continued on next pageGraphing temperature changes115Displaying data in graphsEnergy saving11 Set the goal values for the axis.z Touch [Ax1TgtVal] and enter the numbers with thetouchscreen numeric keypad.z A red line is inserted to indicate the goal values for thegraph.z You can set any goal.1112 Touch [GraphDsp].z The graph is displayed in the main screen.z To cancel the settings, touch [Cancel].12Line graph exampleDisplay methodBy unit ItemUnts ChngPrDy (ChngPrYr)*1 *1 *1*1 You can touch to change the units displayed (10 units before or after).Notey Touch [Graph Disp.Set.] to change the display range and displayed items.Graphing temperature changes