Panasonic CZ-256ESMC3 Technical Data Manual

Also see for CZ-256ESMC3: Quick reference Operating instructions

ー 109 ーOperating Instructions Intelligent Controller126Perform remote operation of the unit over a network Setting9 Touch [Register].z The settings are registered and the “Select part” dialoguecloses.z To cancel registration, touch [Cancel].910 Touch [Register].z The settings are registered and the “Edit user sttngs”dialogue closes.1011 Register other users.z Repeat steps 3 to 10.Continued on next page6 Select the privileges.z Select “0:Administr.”, “1:Operator”, or “2:GenralUser”.z Only one person can have the “0:Administr.” setting.67 Select what is to be operated.z The “Select part” dialogues are displayed when you touchthis.z Select what is to be operated (“I/D unit”, “Control Gr.”,“Area”).z When the privileges are set to “0:Administr.”, all operationsare available so it is not possible to select what to operate.78 Select the devices to be operated (8-1)and touch (8-2).z The devices to be operated move to the list on the right(Web Supported Unit). Select the devices to be operatedand touch to restore.z Multiple devices can be selected to be operated.8- 18- 2Setting the users127Perform remote operation of the unit over a network SettingThe “Web user settings” screenA: Users with a check mark next to them will be thesubject of the changes to the user settings.B: The users with the check marks next to themwill be allowed to perform operations over thenetwork.Priv. This shows the privileges of theuser.0:Administr.1:Operator2:GenralUserI/D unit Users can use the categories witha “”.Control Gr.AreaC: The “Edit user sttngs” dialogue is displayedwhen you touch this.A BC12 Put a check mark in the “Register”column.z Select the users that can operate over the network.1213 Touch [Register].z The setting is registered.z To cancel the settings, touch [Cancel].13Setting the users