Panasonic CZ-256ESMC3 Technical Data Manual

Also see for CZ-256ESMC3: Quick reference Operating instructions

ー 76 ーOperating Instructions Intelligent Controller60Checking the alarm logs and operation/status change logsOperation/Status4 Touch when you want todisconnect the USB memory device.z The message “USB memory can now be safely removed”is displayed. Touch [OK] and then remove the USBmemory device.z Close the storage door after removing the USB memorydevice.41 Open the storage door and connecta USB memory device to the USBterminal.2 Touch [CSV Output].z A confirmation screen is displayed.23 Touch [OK].z The alarm log currently displayed is saved to the USBmemory device in CSV format.z When saving is complete, a message confirming thatsaving is complete is displayed.Checking the alarm logsOutputting (saving) logs as a CSV file61Checking the alarm logs and operation/status change logsOperation/StatusChecking the operation/status change log in a listYou can display a list showing operations for indoor units that logs when and how changes were made.2 Touch [Operation/Status change log].z The “Operation/Status change log” screen is displayed.21 Touch [Log] in “Oper./Status”.1The “Operation/Status change log” screenA: The operation log is displayed. This isusually displayed. Touch to hide.B: The status change log is displayed. This isusually displayed. Touch to hide.C: The “Search” dialogue is displayed whenyou touch this.You can find the log information you needfrom amongst the operation/status changelogs.You can search by either the device name orthe display period. (→ “Searching operation/status change logs” (P.62))D: The operation/status change logs aredisplayed in a list.Item ExplanationName The names of the units are displayed.Operation This shows whether the operation occurred as schedule or if the operation was changed.Status This indicates the operating status (ON or OFF).Mode The operating mode (Heat, Dry, Cool, Fan, A/Heat, A/Cool) is displayed.Set T. The temperature setting is displayed.Fan The fan speed (High, Mid., Low, Auto) is displayed.Flap The airflow direction is displayed.Prhbt This indicates the remote controller operation “Accept”, or “Prhbt1” to “Prhbt4”.Date The date and time of the change to operational status is displayed.E: You can output (save) the displayed list of operation/status change logs in CSV format.(→ “Outputting (saving) logs as a CSV file” (P.63))A CEBD