Panasonic CZ-256ESMC3 Technical Data Manual

Also see for CZ-256ESMC3: Quick reference Operating instructions

ー 81 ーOperating Instructions Intelligent Controller70Check accumulated valuesOperation/Status5 Check accumulated values.(2) Select the items to be displayed (4-2).z You can select multiple items.z Refer to “RglrHourRnge” in “Calendr sttgs for distr calc”(P.148) for information about “RglrHours1” to “RglrHours8”.4- 2(3) Touch .z The settings are registered and the “Display data” dialoguecloses.Checking the list of accumulated values on a pulse meterThe “Pulse acc.” screenA: Set the values to be displayed. Touch toselect either “Adaptor value” or “Total value”.y If you set “Adaptor value”, the displayedvalue changes at 10-second intervals.B: Set the periods to be displayed. The“Calendar” dialogue is displayed when youtouch this.y When “Total value” is set, totals matchingthe time slot set in “Time” (“RglrHours”,“OutOfHours”, etc.) are displayed.C: The accumulated values for pulse metersare displayed in a list.You can scroll up or down by swiping orflicking the screen.Item ExplanationName The names of all units (indoor units and outdoor units) are displayed.Dstr The distribution group number is displayed.Type The type of meter is displayed.Adaptor value (when “Adaptor value” isselected)The accumulated value of the communication adaptor is displayed.Meter value (when “Adaptor value” isselected)The accumulated value for pulse meter is displayed.Time (when “Total value” is selected) The accumulated pulse count values for the adaptor or specified period are displayed. (“All hours”,“OutOfHours”, “SpecifdDay”)Display items (“RglrHours1” to “RglrHours8”) can also be added.D: The “Display data” dialogue is displayed when you touch this, and you can select the items to add to the display.y If you set the “Adaptor value”, you cannot select the items to be displayed.A BDC71Checking distribution dataOperation/StatusChecking distribution dataThis chapter explains how to check distribution data.You can check distribution data in a list by unit and by area on this unit.You can check the distribution ratio, usage, and charges for both electricity and gas.Screen menu Overview PageDistribution data Check the details about distribution calculations in a list. 72