15RQT9431To check the signal condition(➔ 96, Signal Condition)To tune in other satellite channels(➔ 16, Tuning in Other SatelliteServices)To hide unwanted channels(➔ 96, freesat Channel List)To change PIN (➔ 104, Owner ID)To correct the characterPress the “Red” button to delete character one by one.You can delete all input characters by pressing the “Blue” button.You can perform this operation in step , or .To display the Owner ID information on TVPress and hold [g] on the main unit for more than 5 seconds.The PIN is not displayed.After 30 seconds this menu automatically disappears.You cannot change the Owner ID on this screen.You can perform this operation after step .To set the clock manuallyNormally this unit obtains time and date information from TVchannels to set its clock and automatically adjusts the timeseveral times a day.If the clock is incorrect or cannot be automatically set, perhapsdue to bad signal reception, you will need to adjust the clockmanually.In the case of a power failure, the clock setting remains inmemory for approximately 60 minutes.1. Press [FUNCTION MENU].2. Press [e, r] to select “Others”, then press [OK].3. Press [e, r] to select “Setup”, then press [OK].4. Press [e, r] to select “Others”, then press [OK].5. Press [e, r] to select “Clock”, then press [OK].6. Press [w, q] to select “Off” of “Auto ClockSetting”.7. Press [e, r] to select “Manual Setting”, thenpress [OK].8. Press [w, q] to select the item you want tochange.Hour Minute Second Day Month Year9. Press [e, r] to change the setting.10.Press [OK] to confirm new date and time and toinitiate the clock.•TipsTo return to the previous screenPress [BACK/RETURN ].To exit the screenPress [EXIT].NotesIf a TV station transmits a time setting signal, and when “Auto ClockSetting” in the Clock setting menu is set to “On”, the automatic timecorrection function checks the time and if necessary it is adjustedseveral times every day.Quick Start Guide STEP 3
