Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

important safety instructions

26RQT6559Advanced playChanging audio !?[RAM] [DVD-R] [DVD-V] [VCD]You can change the audio being received or played.During reception or playPress [AUDIO].How the type changes depends on when you press the button.∫ While receiving Multi-channel Television SoundStereo (MTS)Stereo > SAP > Mono^--------------------------------}Depending on the type of television broadcast and sound selected,received and recorded sound is as follows:§1 Select “Mono” if reception is poor during a stereo broadcast.§2 If recorded in this mode, main audio is also recorded. Conse-quently it is possible to choose between MAIN and SAP whenplaying back.[Note]≥If you alter the sound setting during recording, the sound will bealtered in the recording itself also.≥It will not be possible to alter the sound by pressing [AUDIO] in thefollowing cases:- When a DVD-R is in the disc tray- When recording mode is XP and LPCM has been selected inthe SETUP menu, Audio Mode for XP Recording (➜page 53).≥You cannot change audio type while recording with DVD-R orrecording on DVD-RAM with LPCM sound. You can use theSETUP menus to select which audio type of an SAP broadcast isrecorded, either “Main” or “SAP” (➜page 53, Audio—Select MTSfor DVD-R or LPCM).DVD/TVDVDVCR Plus+ TV/VIDEO REC MODE RECCHVOLUMETVTVDVD1 2 37 8 90 1004 5 6SLOW/SEARCHSKIPDIRECT NAVIGATORTOPMENUMENURETURNFUNCTIONSPROG/CHECK DISPLAY TIME SLIPADD/DLTENTERPLAY LISTCANCELPOWERÍ ÍOPEN/CLOSESETUPERASE F Rec POSITION MEMORY MARKERAUDIO INPUT SELECT CM SKIPSTATUS FRAMEAUDIOAudioselectedStereo SAP MonoTelevisionbroadcastStereorSAPMainaudio(Stereo)§1Secondaryaudioprogram(SAP)§2Mainaudio(Monaural)MonorSAPMainaudio(Monaural)Secondaryaudioprogram(SAP)§2Mainaudio(Monaural)Stereo Stereo§1 Stereo§1 MonauralMono Monaural Monaural MonauralCH 12StereoNo disc((e.g.: “Stereo” is selected“((” appears when theunit is receiving the typeof audio you selected.27RQT6559Advanced play∫ While playing DVD-RAMLR>L>R^---------------}≥If you have recorded an SAP broadcast by pressing [AUDIO] toselect SAPMAIN()SAPFor your referenceYou can change the audio for the images being played with simulta-neous rec and play and Time Slip.∫ While playing DVD-RYou cannot change audio type.∫ While playing DVD-VideoYou can change the audio channel number each time you press thebutton. This allows you to change things like the soundtrack lan-guage.∫ While playing Video CDLR>L>R^---------------}[Note]If you cannot change the audio type when you have used only anoptical digital cable for connection, set “Dolby Digital” to “PCM”(➜page 51). Alternatively, you may connect to an amplifier with anaudio/video cable and change the input on the amplifier to suit theconnection.PLAYL RDVD-RAMe.g.: “L R” is selectedSound track 1 ENG Î Digital 3/2.1chSound track 2 FRA Î Digital 3/2.1che.g.: English is the selected language.The language is switched to French.PLAYL RV-CDe.g.: “L R” is selected!?