Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

important safety instructions

Reference62RQT6559Troubleshooting guide Possible solutions are indicated with “ ” on the relative pages in these instructions.!?Recording and timer recording PageCannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc theunit can record onto.≥The disc is unformatted. Format the disc so this unit can record on it.≥The disc is protected with the write-protect tab. Use a ballpoint pen or similar to release thewrite protection.≥The disc is protected with DISC SETTING. Release the disc protection.≥The disc is full or nearly full. Erase unneeded programs or use another disc.834193436VCR Plusr programmingdoes not work properly.≥The guide channels are incorrect. Go to Channel in the SETUP menus and correct them with“VCR Plusi CH Setting”.≥The clock is wrong. Go to Set Up in the SETUP menus and correct it with “Clock Settings”.1354Timer recording does notwork properly.≥The timer program is incorrect. Correct the program.≥The unit is not on timer recording standby. (“Á” on the unit’s display is not on.) Press [Í, DVDPOWER] to turn “Á” on.≥Different timer program times overlap.≥The clock is wrong. Go to Set Up in the SETUP menus and correct it with “Clock Settings”.32——54The unit switches to standbywhile making a timer record-ing.≥The disc has run out of space. Use a disc that has enough space to record the program. —The timer program remainseven after recording finishes.≥The program remains if you select “DAILY” or “WEEKLY”.≥The program remains if recording failed for some reason, but is cleared automatically at 4a.m. two days later.31—Timer recording does notstop even when [∫] ispressed.≥Press [∫] and then [ENTER] within 5 seconds to turn “Á” off. Recording stops. —The available recording timedoesn’t increase even aftererasing recordings on thedisc.≥As this unit is unable to erase data written to DVD-RAM with a computer, the available record-ing time does not increase. The data will be erased if you reformat the disc.≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.349Discs make sounds as they rotate. This does not indicate a malfunction.1. Damage requiring service—The unit should be serviced by quali-fied service personnel if:(a)The AC power supply cord or AC adaptor has been damaged; or(b)Objects or liquids have gotten into the unit; or(c)The unit has been exposed to rain; or(d)The unit does not operate normally or exhibits a marked changein performance; or(e)The unit has been dropped or the cabinet damaged.2. Servicing—Do not attempt to service the unit beyond thatdescribed in these operating instructions. Refer all other servicingto authorized servicing personnel.3. Replacement parts—When parts need replacing ensure the ser-vicer uses parts specified by the manufacturer or parts that havethe same characteristics as the original parts. Unauthorized substi-tutes may result in fire, electric shock, or other hazards.4. Safety check—After repairs or service, ask the servicer to performsafety checks to confirm that the unit is in proper working condition.For product information or assistance with product operation:In the U.S.A., contact the Panasonic Customer Call Center at1-800-211-7262, or e-mail consumerproducts@panasonic.com, orweb site (http://www.panasonic.com).In Canada, contact Panasonic Canada Inc. Customer Care Centreat 1-800-561-5505, web site (www.panasonic.ca), or an authorizedServicentre closest to you.Product ServiceProduct information63RQT6559ReferenceSpecificationsRecording system: DVD video recording standards(DVD-RAM),DVD video standards (DVD-R)Optical pick-up: System with 1 lens, 2 integrationunits (662 nm wavelength for DVDs,790 nm wavelength for CDs)Recordable discs: 12 cm 4.7 GB DVD-RAM discs12 cm 9.4 GB DVD-RAM discs8 cm 2.8 GB DVD-RAM discs12 cm 4.7 GB DVD-R discs(for General Ver. 2.0)Recording time: Max. 6 hours (using 4.7 GB disc)XP: 60 minutesSP: 120 minutesLP: 240 minutesEP: 360 minutesDiscs played: 12 cm 4.7 GB DVD-RAM discs12 cm 9.4 GB DVD-RAM discs8 cm 2.8 GB DVD-RAM discs12 cm 4.7 GB DVD-R discs(for General Ver. 2.0)DVD-VIDEO discsCD-Audio discs (CD-DA)Video CD discsCD-R/CD-RW discs(CD-DA, Video CD formatted discs)Video systemTV system: NTSC system, 525 lines, 60 fieldsRecording system: MPEG2 (Hybrid VBR)Input: LINE (pin jack), 1.0 Vp-p; 75 ≠S connector Y: 1.0 Vp-p; 75 ≠C: 0.286 Vp-p; 75 ≠Output: LINE (pin jack), 1.0 Vp-p; 75 ≠S connector Y: 1.0 Vp-p; 75 ≠C: 0.286 Vp-p; 75 ≠Component video output (525p/525i):Y: 1.0 Vp-p; 75 ≠P B : 0.7 Vp-p; 75 ≠P R : 0.7 Vp-p; 75 ≠Antenna reception input:TV Channel: 2ch–69ch, 75 ≠CATV Channel: 1ch–125ch, 75 ≠Audio systemRecording system: Dolby Digital (XP/SP/LP/EP)LINEAR PCM (XP mode only)Input: LINE (pin jack)Reference input: 309 mVrmsFS: 2 Vrms (1 kHz, 0 dB)Input impedance: 47 k≠Output: LINE (pin jack)Reference output: 309 mVrmsFS: 2 Vrms (1 kHz, 0 dB)Output impedance: 1 k≠(Load impedance: 10 k≠)Number of channels: Recording:2 channelsPlayback:2 channelsOther input/output connectors:Digital audio optical output connectorOperating temperature range:5 oC–40 oC (41 oF–104 oF)Operating humidity range:10 %–80 % RH (no condensation)Clock unit: Quartz-controlled 12-hour digital dis-playLASER SpecificationClass f LASER ProductWave length: 775–815 nm 655–666 nmLaser power: No hazardous radiation is emitted withthe safety protectionPower supply: AC 120 V, 60 HzPower consumption: 26 WDimensions: Approx. 430 (W)k79 (H)k306 (D) mm[Approx.1615/16q(W)k31/ 8q(H)k121/16q(D)](excluding protrusions)Mass: Approx. 3.5 kg (7.7 lbs)[Note]Specifications are subject to change without notice.Mass and dimensions are approximate.Power consumption in standby mode: approx. 3 W

/ 35

Related manuals for Panasonic DMR-E30