Panasonic DMR-E30 Operating Instructions Manual

Also see for DMR-E30: Operating instructions Installation instructions Operating instructions Bedienungsanleitung

Contents

important safety instructions

Advanced operation54RQT6559Changing the unit’s settings1 Press [SETUP] to show the menus.2 Press [3, 4] to select “Set Up” andpress [1].3 Press [3, 4] to select “Auto ClockSetting” and press [ENTER].If you have not yet set channels, the “Auto Channel/ClockSetting” screen appears.4 Press [ENTER].Auto setting starts. This can take some time, up to a fewhours in some cases. (To stop auto clock setting, press[RETURN].) The following screen appears when setting iscomplete. Press [ENTER].≥If the time was not set correctly, use manual clock setting or timezone adjust.≥If you connect the unit through a cable TV box or DSS receiver(➜page 46), tune to your local PBS station before starting autoclock setting. Use manual clock setting if this does not work or ifthere is no local PBS channel in your area.≥DST, Daylight Saving Time, shows the summertime setting.≥TIME ZONE shows the time difference from Greenwich meantime(GMT).EST=GMT s5, CST=GMT s6, MST=GMTs7, PST=GMTs8,AST=GMT s9, HST=GMTs10, For other areas: xx hr3 Press [3, 4] to select “Manual ClockSetting” and press [ENTER].4 Press [2, 1] to select the item youwant to change and press [3, 4] tochange the setting.MONTH(--)DAY(----)YEAR(--)HOUR (12-hour display)^>TIME ZONE()DST()MINUTE(JDST (Daylight Saving Time): ON or OFFIf you select “ON”, the clock is advanced one hour startingat 2 a.m. on the first Sunday in April and ending at 2 a.m. onthe last Sunday in October.TIME ZONE:EST()CST()MST()PST()AST()HST(s5) (s6) (s7) (s8) (s9) (s10)^---------------------------------------------------------------------------------J5 Press [ENTER].The “Set Up” screen (➜step 2) reappears and the clockstarts.[Note]When you change the time zone, the recording times for programsrecorded before the time zone was changed also change to corre-spond to the new time zone.Adjust the time zone (s1 or r1) if it was not set correctly with autoclock setting.You cannot change this setting if you set the clock manually.3 Press [3, 4] to select “Time ZoneAdjust” and press [ENTER].4 Press [3, 4] to select “s1”, “0”, or“r1” and press [ENTER].The “Set Up” screen (➜ step 2) reappears.Clock SettingsAuto Clock SettingVOLUME7 8 90 100SLOW/SEARCHSKIPDIRECT NAVIGATORTOPMENUMENURETURNFUNCTIONSPROG/CHECK DISPLAY TIME SLIPADD/DLTENTERPLAY LISTCANCELOPEN/CLOSESETUPERASE F Rec POSITION MEMORY MARKERAUDIO INPUT SELECT CM SKIPSTATUS FRAME2≥3≥4≥5≥6≥71RETURNCANCEL!?SELECT TABOff TimerRemote Control CodeClock SettingsAuto Clock SettingManual Clock SettingTime Zone AdjustRe-initialize Setting6 hr0Set Code 1SET UPRETURNSet UpDiscVideoAudioDisplayTV ScreenChannelProceedwith thestepsdescribedbelow.SET UPSet UpDiscVideoAudioDisplayTV Screen ENTERAuto Clock SettingRETURNConnect antenna cable and if you use acable box, tune it to your local PBS CHthen...ChannelPlease push the ENTER key.SET UPSet UpDiscVideoAudioAuto Clock SettingAuto Clock Setting is complete.4/4/2002 12:15 AMDST............. ONTIME ZONE.... CSTChannelManual Clock SettingTime Zone AdjustSET UPDiscVideoAudioDisplayTV ScreenSet UpENTERManual Clock SettingRETURNCHANGE SELECT/ :/ MON PMMONTH DAY YEAR HOUR MINUTE3 25 2 182002DST TIME ZONEOFF PSTChannelSET UPDiscVideoSet UpTime Zone Adjustj10i1Channel55RQT6559Advanced operation1 Press [SETUP] to show the menus.2 Press [3, 4] to select “Channel” andpress [1].Check the antenna system. Automatic setting is performed basedon the current antenna system (➜page 12).3 Press [3, 4] to select “Auto ChannelSetting” and press [ENTER].If you have not yet set clock, the “Auto Channel/Clock Setting”screen appears.4 Press [ENTER].Auto setting starts. This takes a few minutes. (To stop autochannel setting, press [RETURN].) When finished, the Com-plete screen or time display is shown. Press [ENTER].3 Press [3, 4] to select “Preset Chan-nel Caption” and press [ENTER].4 Press [3, 4] to select the caption andthen press [1].≥The screen scrolls a page at a time if you press and hold[3, 4].You can choose from the following captions.ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,WB, TSN, DSC, GLOB5 Press [3, 4] to select the channelcorresponding to the caption andthen press [2].≥Channels are not displayed if they do not contain a stationor if captions have been added manually.≥To delete the channel number, press [CANCEL].≥Repeat steps 4 and 5 as necessary.6 Press [ENTER].The “Channel” screen reappears.3 Press [3, 4] to select “Manual Chan-nel Caption” and press [ENTER].4 Press [3, 4] to select the channeland then press [1].≥Channels are not displayed if they do not contain a stationor if preset captions have been added.5 Press [3, 4] to select the first char-acter and then press [1].≥You can choose from the following characters:A–Z, 0–9, -, &, !, /, (space)≥To delete the caption, press [CANCEL].≥Repeat step 5 to enter the other characters.6 Press [2] to return to the ChannelNumber column when you are fin-ished.Repeat steps 4, 5, and 6 as necessary.7 Press [ENTER].The “Channel” screen reappears.Channel SettingsAuto Channel SettingPreset Channel CaptionSELECT TABAntenna SystemAuto Channel SettingChannel CaptionPreset Channel CaptionManual Channel CaptionVCR Plusi CH SettingCATVSET UPRETURNSet UpDiscVideoAudioDisplayTV Screen ENTERChannel Proceedwith thestepsdescribedbelow.SET UPSet UpDiscVideoAudioDisplayTV Screen ENTERAuto Channel SettingRETURNConnect antenna cable and if you use acable box, tune it to your local PBS CHthen...ChannelPlease push the ENTER key.SET UPSet UpDiscVideoAudioDisplayTV Screen ENTERPreset CaptionCaption Channel Number------GLOBABC------RETURNPBSCBSSELECTChannelManual Channel CaptionSET UPSet UpDiscVideoAudioDisplayTV ScreenManual CaptionCaptionChannel Number- - - -RETURN125123------------ENTERSELECTChannelSET UPSet UpDiscVideoAudioDisplayTV ScreenManual CaptionCaptionChannel NumberAAAARETURN6101223------------ENTERSELECTChannel 8 ----