Setup with Q-LinkDownload from TV usingYou can download the tuning positions from the TV set. This unit Auto Clock Settingfunction synchronizes the time when the TV channel that is broadcasting time and dateinformation is tuned.! Switch your television on and select the AV channel.! Switch the device on using the Stand-by/on switch.The unit starts the station transfer. The station transfer is complete when the menu OwnerID appears.(Registered trademark of Panasonic)If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setupautomatically. In this case you can re-start Auto-Setup again. See page 72.If you want to cancel Auto-Setup before it has finished, press the RETURN button.You can restart Auto-Setup again. See page 72.! Press to set the correct time and date and press ENTER to finish this setting.If the clock setting menu appears(Auto clock set was not possible due to a weak signal)Mind that a wrong date or time will influence the programmed recording of TVprogrammes (don't forget to change summer time and winter time).You can complete the Owner ID now or skip this step and do it later. To do it later, pressthe RETURN button. Your DVD Recorder is now ready to use.! To set the Owner ID now, use and press the Numeric buttons or to enter afour-digit PIN number. Press , to correct the digit.! Make sure that you will remember the PIN number (make a note of it).! Press the ENTER button twice to confirm.! Enter the [Name], [House No] and [Postcode] in the same way, using .! Press the ENTER button to confirm each entry.! Press the RETURN button to leave the Owner ID screen.! You will now see the TV picture. Your DVD Recorder is now ready to use.Owner IDNote that you must first perform a station search. If you have a Panasonic television,[Download from TV] will be displayed automatically at the beginning of the station transfer.16Pos 4Download from TVRETURNDownload in progress, please wait.RETURN: to abortClockOffAutomatic0 00 00 1 1 2005: : . .Time DateCHANGEENTER RETURNClock cannot be set automatically.Please set the clock manually.ENTER: store RETURN: leaveSELECT0 9NoOwner IDRETURNNameHouse No.PostcodePIN number * * * *RETURN : leave* * * * * * * * * * * * * ** * * * * * * * * * ** * * * * * * * * * *