3Matsushita Electric Industrial Co., Ltd.http://www.panasonic.co.jp/global/1. Read the operating instructions, the safety precautions, and theinformation on setting up the unit on pages 4 - 5 thoroughly before youconnect, operate or adjust any settings on the unit.2. Insert the batteries into the remote control.3. Connect the device to your television.4. The automatic settings start after the unit is switched on.With Q-Link function and 21-pin Scart socket:During [Download from TV], the station settings of all receivabletelevision stations are automatically transferred from your television setto the DVD Recorder.Connecting with 21-pin Scart cableConnecting with RF cable (Aerial cable)Connecting with Audio/Video cable / S VIDEO cableThe station settings of all receivable television stations areautomatically transferred from the teletext data to the DVD Recorder.17221922Dear customerThank you for your trust and your decision to purchasethis top-quality device. Panasonic is one of the leading manufacturersof entertainment electronics devices.We are sure that you will be completely satisfied with this device.This unit has two tuners.The built-in DVD recorder and VHS recorder can thereby recordprogrammes independently of each other, e.g. simultaneously.With the new Quick Start feature, the unit is ready for use withinapprox. 1 second. Thus, if a DVD-RAM was previously inserted,recording can begin immediately after the unit is switched on fromStandby mode.Connecting with 21-pin Scart cable:Setup with Q-LinkSetup without Q-Link (Automatic Tuning)Connecting with RF cable (Aerial cable):Auto Setup with RF cable (Aerial cable) (Automatic tuning)Connecting with Audio/Video cable / S VIDEO cable:Setup without Q-Link (Automatic Tuning)The station setting for DVD is automatically transferred to VHS.5. The basic settings of the unit are complete.You can change the basic settings in the menu.SETUP 69 - 79Preparation151618Before You StartInserting BatteriesThe batteries last for about a year, depending on how often you use theremote control unit.! Do not mix old with new batteries, or batteries of different types.! Only use batteries without any harmful substances (lead, cadmium, mercury).! Do not use rechargeable type batteries.! Remove the batteries if the remote controlunit will remain unused for longer periods of time.! Do not heat or short-circuit the batteries.Immediately remove used-up batteries andreplace with batteries of type AA, UM3 or R6.! Be sure to put in the batteries the right way round + and -.Dispose of batteries,packaging material and the unit according to statutory regulations.They must not be thrown into the household refuse.