Panasonic DMR-ES30VEB Operating Instructions Manual

Also see for DMR-ES30VEB: Quick start guide Service manual

Contents

Storage space on the discSymbols in the TIMER RECORDING menuDVDProgramme Delivery Control adjusts the start and stop time of a timer recordingautomatically to ensure the recording starts and finishes in line with the programmebroadcast.This is useful when a programme over-runs the published times.The station must be transmitting PDC and the exact time must be set for PDC to work.The DVD Recorder detects whether a station is transmitting PDC only during the tuningprocess. If PDC is introduced or discontinued by a station you will need to re-tune theDVD Recorder before it becomes aware of this.PDC transmissions are not currently nation-wide so please check with your localbroadcaster for more information.ON : The station transmits PDC signals. You must set the timer to the time specifiedin the TV magazines.- - - : The station does not transmit PDC signals. Try to set the start and stop timesuch that the entire film can be recorded even if a programme begins or endsearlier or later than planned.OFF: If you do not want to use the PDC signals, you can turn them off.PDC function46VPSPDCNr Name Datum ModeStopStartTIMERRECORDING Remain 1:58 SP12:09:37 18/11 THUPDCNo. Name Date ModeStop DiscspaceStartNew Timer Programme01 BBC1 MON-SAT 8:30 ON8:00 SP02 ITV 18/11 THU 15:30 ON15:00 SP03 CH4 18/11 THU 11:30 ON10:30 SP !ENTERRETURN CANCEL10.2.OKTIMER-controlled recordings PROG/CHECKChecking, changing or deleting TIMER RECORDINGS! Press PROG/CHECK.! Use to select the TIMER RECORDING.Delete a programme with CANCEL/RESET.Programmes that are currently being recorded cannot be deleted.Check the settings or correct them if necessary using ENTERand . Confirm your changes with ENTER.Programmes that are currently being recorded cannot be changed.Checking or changingDeletingIf you selected PDC [On], TIMER-controlled recordings are deleted from thelist after two days.Make sure that the unit is switched to timer standby mode.The symbol lights up in the unit display.This programme is currently being recorded.The programme overlaps other programmes.The disc was full or the highest number ofprogrammes or scenes was reached so that theprogramme could not be recorded.The television programme was copy-protectedso that the programme could not be recorded.The programme could not be recorded foranother reason.WFXOK: There is enough storage space available onthe disc for the recording. If PDC is switched onduring the recording, then the entire programmewill probably not be recorded.(Date): For recordings that are made daily orweekly, the display indicates whether there isenough storage space on the disc.!: Is displayed if the disc is not in the unit, is write-protected or does not have enough storage space.