5223VIDEO IN L/MONO - AUDIO IN - RVHSEXT LINK EXT LINKDVDAV3S VIDEO INDMR-ES30VPanasonic/ /A B CS VIDEO INABCYellow (Video)White (L)Red (R)Audio/Video cableS VIDEO cableRecording from anexternal device,e.g. a camera Connect the external device to the AV3 input sockets on the front side of the unit.VHS-RTP channel (copy input channel)If you select the TP channel, the DVDelement can receive video/audio signalsfrom VHS and copy to DVD.If you select the DC channel, the VHSelement can receive and record video/audiosignals from DVD.DC channel (copy input channel)You cannot select the DC channel and theTP channel at the same time.This unit cannot record signals from PCs.RAM -R ( )-RW V +RIf [M1] and [M2] are selected on theconnected device, you can choose theaudio mode during playback.Select [M1] or [M2] on theconnected device. You cannot select theaudio mode during playback.If the output signal of the external device isan NTSC signal, set the TV system in theSETUP menu to [NTSC].RAMIf you activated the write-protection,deactivate it.! Press REC MODE to select the recordingmode.! In stop mode, use INPUT SELECT to selectthe input channel AV3.! Start the playback on the external device.! Press REC at the point where you want tobegin recording.! Use STOP to stop recording.Recording to DVD! Press REC MODE to select the recordingmode.! In stop mode, use INPUT SELECT to selectthe input channel AV3.! Press PLAY . At the point where you wantto begin recording, press PAUSE .! Press REC.! Start the playback on the external device.! Press PAUSE to start recording.! Use STOP to stop recording.RAMInsert a video cassette with intact write-protection tab.Recording to VHSDVDPress PAUSE to pause recording. Press thebutton to resume recording.Recording of bilingual programmesVHSDVD( )-RW V +R! To select the DC channel press CH ,or INPUT SELECT several times.! To select the TP channel press CH ,or INPUT SELECT several times.