DVDRecording functionsRecording 41-43TIMER-controlled recordings 44-46Recording 47TIMER-controlled recordings 48-4950TIMER recording from Sat 51with VIDEO Plus+Recording from an external 52device, e.g. a cameraDUBBING / Copying 53TIMER recordings via externaldevices (EXT LINK)4181RAM -R ( )-RW V +RRAMRAMRecordingPause during recording! Press PAUSE to pause the recording.! Press PAUSE again to resume recording.The title is not divided.! Use CH , or the number buttons to select the TV channel.! Use INPUT SELECT to select the AV channel for externally connected devices.! Press REC MODE to select the recording mode.! Press REC to start the recording.! Press STOP to stop the recording.Up until the recording is stopped, it counts as 1 title. After recording to disc is complete, ittakes some time for the unit to process the information for device control.If you have activated the write-protection, cancel it.Recording television programmesUsing AUDIO, you can change the received audio channel during the recording. It hasno effect on the recorded audio channel.You can only change the channel or the record mode in pause mode.The material is then recorded as a separate title.You can record up to 99 titles on one disc (+R: 49 titles).If you use an unformatted DVD-RAM, you must format it before the first recording.The recording is saved in free areas on the disc. If there is no more space left on thetarget drive, you must delete recordings or use a new disc.When recording dual-channel TV programmes on DVD-R, DVD-RW or +R, only oneaudio channel [M1] or [M2] can be recorded.RAM -R ( )-RW V +R