26AUDIO OUT L/RRed/RWhite/LAudio cableSAB Video cableSA BTVCOMPONENTVIDEO INPB PRYAudio-input L/RGreen/YBlue/PBABRed/PRCA B CVIDEOAUDIOS VIDEOLRPBPRYDVD OUTCOMPONENT VIDEO OUTS76Connecting a television with COMPONENT VIDEO input sockets! Press FUNCTIONS in stop mode.! Use to select [To Others] and confirm with ENTER.! Use to select SETUP and confirm with ENTER.! Use to select [Connection], , to select [Progressive] and confirmwith ENTER.! Use to the select the [On] option and confirm with ENTER.COMPONENT VIDEO OUT socketThese sockets can be used for interlace or progressive output and deliver aclearer picture than the S VIDEO OUT socket. Connections via these socketsoutput colour difference signals ( / ) and brightness signals ( ) separately.Colours can be reproduced true to colour. The properties of the COMPONENTVIDEO input socket are dependent on the television set or screen.Always connect sockets of the same colour. Connect the Audio cables to thecorresponding audio input sockets of the television.PB PR YProgressive television pictureThe progressive aspect ratio (height to width) is set to 16:9.DVD-Video with an aspect ratio of 16:9 will be displayed properly. However,video material with an aspect ratio of 4:3 will be displayed stretched to the rightand left.Displaying the picture in the correct aspect ratioIf it is possible to adjust the aspect ratio of your television for progressiveimages, set the Progressive setting to [On].If the AV1 Output setting in the SETUP menu is set to[RGB (without component)], no output will take placeto the COMPONENT VIDEO OUT sockets.Set this option to [Video (with component)].If the unit is connected to the television via the VIDEO OUT,the S VIDEO OUT or the AV1 socket, output takes place inthe interlace format regardless of the settings.If your television with LCD or plasma screen supports the progressiveprocedure, connect it to the COMPONENT VIDEO OUT sockets.If you want to enjoy progressive-quality video, set Progressive to [On].In normal televisions, progressive output can lead to flickering, even if the televisionis progressive-compatible. Make sure that the Progressive setting is set to [Off].= Extra equipment for the connections shown