Panasonic DMR-ES30VEB Operating Instructions Manual

Also see for DMR-ES30VEB: Quick start guide Service manual

Contents

DVDVHSBefore TIMER recordings via external devicesSwitching off control via the external device! Press EXT LINK to end the recording or to switch off the standby mode for theTIMER-controlled recording. The EXT Link display turns off.Switch the remote control to VHS.! Press EXT LINK. The VHS element switches to record standby mode. EXT Llights up on the display.Switch the remote control to DVD.! Press FUNCTIONS, use to select [To Others] and press ENTER.! Use to select SETUP and press ENTER.! Use to select Connection, , to select AV2 Settings and press ENTER.! Use to select Ext Link and confirm with ENTER.! Use to select [Ext Link 1] or [Ext Link 2] and confirm with ENTER.If the television is connected to the AV1 connectionvia the 21-pin Scart cable, the picture to be recordedappears on the screen.The beginning of the recording may not be recordedcorrectly in certain cases.The Ext Link 2 setting cannot be used if the inputsignal is in NTSC format.You control the recording function via an external device (e.g. receiver) using EXT LINK.Connect the external device with a 21-pin Scart cable to the AV2 socket.Adjust the Ext Link function for the connected device.During standby mode, you can play or record discs.TIMER recordings via external devices (EXT LINK)The programming of the recording must take place on the external device. The recordingbegins when a corresponding signal is received from the connected device. As long as avideo picture is transmitted by the external device, the selected element records it.! Press EXT LINK.Standby mode for TIMER-controlled recordings is activated on the DVDelement. EXT L lights up on the display.During standby mode, you can play DVD-RAMs or VHS cassettes or record to VHS.Ext Link 1:For digital receivers that send a special recordingcontrol signal, e.g. the F.U.N. receiver (TU-DSF41).Ext Link 2:External recording control for satellites or digitalreceivers (video signal).TIMER controlled recordings DVD50TuningDiscPictureSoundDisplaySETUPAV2 Input VideoExt Link 2ExtAV2 SettingsExt Link 1Ext Link 2Ext LinkSELECTRETURNENTERExt Link Ext Link 1ConnectionOthersIf you selected the AV2 Connection [Decoder (DVD) or (VHS)] setting, the Ext Link feature isnot available.