Panasonic DMR-EZ28K Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

13Getting StartedRQT9046The types of transmission:e, r to select “Antenna” or“Cable”, then Automatic Clock and Channel SettingsPlease select the wire connected to RF IN.AntennaOKCableto start automatic channel/clock setting.8 Confirm the time, thenDST (Daylight Saving Time) shows thesummertime setting.Time Zone shows the time difference fromGreenwich Mean Time (GMT).Set Clock AutomaticallyClock Setting completed successfully.4/4/2007 11:15 AMDST----------- OnTime Zone---- ESTOKSee “Notes”(➔ right)––TipsIf the unit displays “No channels were found.”, turn off the unitand confirm the cable or antenna input is connected to the RF INterminal. Restart the set up again (➔ below).If “Auto Clock Setting is incomplete.” is displayed, press [OK]and set the clock manually (➔ right).If the clock is not correct, set the clock with “Adjust Time Zone”(➔ 49) or “Set Clock Manually” (➔ 49).You can delete channels you don’t need after completing AutoChannel Setting (➔ 46).Restarting the Auto-Setup(after relocation, for example)1. When the unit is on and stopped, press and hold [CH 2] and[CH 1] on the main unit at the same time for about 5 seconds.The unit turns off.2. Press [^ DVD POWER] to turn the unit on.(The signal source and channel captions revert to their defaultvalues. All scheduled recordings are cleared.)To cancel in the middlePress [RETURN].NotesConditions of the received channel may cause automatic channel/clock setting to take extra time.••••Manual Clock SettingPerform steps 1–5 on page 12.w, q to select the item you wantto change.Set Clock Manually/ :/ SAT AMDSTEST1 1 2000 12OffTime ZoneEST00Month Day Year Hour Minutee, r to change the setting.Repeat steps 6-7 to change other items.–8 to confirm new date andtime.The clock starts.–NotesThe automatic clock setting can take a few minutes.Time ZoneEST (Eastern Standard Time) = GMT –5CST (Central Standard Time) = GMT –6MST (Mountain Standard Time) = GMT –7PST (Pacific Standard Time) = GMT –8AST (Alaska Standard Time) = GMT –9HST (Hawaii Standard Time) = GMT –10For other areas: xx hrDST (Daylight Saving Time)If you select “On”, the clock is advanced one hour beginning at 2a.m. on the second Sunday in March and ending at 2 a.m. on thefirst Sunday in November.Set the DST period manually when it varies according to regions(➔ below).To set the DST period manually1. Press [SETUP].2. Press [e, r] to select “Setup” then press [q].3. Press [e, r] to select “Clock Settings” then press [OK].4. Press [e, r] to select “Set the time change dates for DST” thenpress [OK].5. Press [e, r, w, q] to set the “Month”, “Day”, “Hour”, and “Minute”then press [OK].Reinitializes thesettings.SetupChannelSetupDiscVideoAudioDisplayTV ScreenSet the time change dates for DSTOK: AM3 SUN2nd 2 00MonthBeginningDay Hour Minute: AM11 SUN1st 2 00Restore DefaultMonthEndDay Hour Minute•••