Panasonic DMR-EZ28K Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

70RQT9046To Reset this UnitTo reset the channel information and theclock settingsOn the main unitCHPress and hold both buttonsfor about 5 seconds.To reset the ratings level settingsYou can reset both parental rating (➔ 47) andDVD-Video rating (➔ 49).With the unit stopped;OPEN/CLOSE to open the disc tray.On the main unitCH RECPress and holdboth buttons forabout 5 seconds.To restore the unit if it freezesOn the main unitPOWER8 Press and hold for morethan 10 seconds.The unit is off.–orOn the main unitPress and hold formore than 1 secondwith a pointed object.If the Antenna Connector doesn’t MatchUse one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 Ω coaxialcable to the antenna terminals on your TV or other equipment. Refer to the other equipment’s operating instructionsfor more information.Type This unit Other equipment (television etc.)A twin leadfrom the antenna(Flat) Twin lead300 Ω cable300−75 Ω transformerTo this unit’s RF INterminal75−300 Ω transformer75 Ω coaxialcableVHF or UHFTelevisionTroubleshooting GuideBefore requesting service, make the following checks. If you are in doubt about some of the check points, or if theremedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 79 if youreside in the U.S.A., or refer to “Product information” on page 69 if you reside in Canada.The following does not indicate a problem with the unit:Regular disc rotating sound.Poor reception due to atmospheric conditions.Image disturbance during search.Periodic interruptions to the reception due to satellite broadcasting breaks.Operations not working due to a poor-quality disc. (Try again using a Panasonic disc.)The unit freezing due to the activation of one of its safety devices (➔ above, To restore the unit if it freezes).••••••General Issues Power PageNo power. Insert the AC power supply cord securely into a known active AC outlet.• 8 to 10The unit switches to standbymode.This is a power saving feature. Change “Off Timer” in the Setup menuto “Off” to always keep the unit on.• 48One of the unit’s safety devices is activated. Press [POWER 8] onthe main unit to turn the unit on.• −The power is turned offautomatically.If you connected this unit to an “HDAVI Control” compatible TV with an HDMIcable, this unit will be automatically turned off when the TV is set to off.• 34