7RQT9046Getting StartedRear PanelP RP BYRFOUTRFINCOMPONENTVIDEO OUTVHF/UHFAC INOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM)R-AUDIO-L VIDEO S VIDEOIN1 OUTAV OUTbl bk 9 85 6 732 411 AC IN~ = Power supply2 Cooling fan3 RF input terminal .................................. (➔ 8, 9)4 RF output terminal ................................ (➔ 8, 9)5 AUDIO/VIDEO input terminal ............. (➔ 9, 10)6 S VIDEO input terminal7 Digital audio output terminal ................... (➔ 60)8 HDMI AV OUT terminal .................... (➔ 11, 61)9 S VIDEO output terminal ........................ (➔ 60)bk AUDIO/VIDEO output terminal ........ (➔ 8 to 10)bl COMPONENT VIDEO OUT terminal ..... (➔ 60)The Unit’s Display1 23451 Recording indicator2 Main display section3 Disc indicatorThis indicator lights up when a disc that is supported by thisunit is inserted.4 Scheduled recording indicator (➔ 18)On:When a scheduled recording program is registered and arecordable disc is inserted.Flashes:The scheduled recording indicator flashes when the unitcannot go to scheduled recording standby (e.g. there is nodisc, etc).It does not flash if Quick Start is off.5 Progressive indicatorThis indicator lights up when you select “24p” in“Progressive/24p” (➔ 43).Inserting Discs;OPEN/CLOSE to open the tray.Insert a disc.Press [; OPEN/CLOSE] again to close thetray.Insert label-up.––NotesWhen using 8 cm (3˝ ) DVD-RAM or 8 cm (3˝ ) DVD-R, remove thedisc from the cartridge.It is not possible to record or play continuously from one side of a doublesided disc to the other. You will need to eject the disc and turn it over.The unit may take some time to respond to [; OPEN/CLOSE].Inserting an SD CardADAPTEROpening the front panel (➔ 6)Inserting the cardPress on the center ofthe card until it clicksinto place.If you are using a miniSD card/microSD card, insert it into thecard adaptor that comes withthe card.Insert and remove this adaptorfrom the unit.Insert the card label up with thecut-off corner on the right.Removing the cardPress on the center of the cardand pull it straight out.NotesWhen “SD” is flashing or when copying a picture or displaying theAlbum in the SD card, do not turn off the unit or remove the SD card.Such action may result in malfunction or loss of the card’s contents.Inserting USB memoryYou can insert the USB memory directly into the USB port.PreparationBefore inserting any USB memory to this unit, ensure that the datastored in it has been backed up.Opening the front panel (➔ 6)Inserting the USB memoryCheck the orientation of the USBconnector and insert it straight in.Removing the USB memoryComplete all USB memory-related operations and pull theUSB memory straight out.When “uSb” (USB) is flashingon the unit’s display, do notturn off the unit or remove theUSB memory.NotesThere are few USB memory devices that cannot be connected.Some USB devices inserted into this unit may cause this unit to stopoperating. Such USB devices cannot be used on this unit.Confirm that “uSb” (USB) appears on the unit’s display when acompatible USB memory is inserted while stopped.If a USB memory being accessed is pulled out, then the data maybe damaged.•••••••Media Handling