Panasonic DMR-EZ28K Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

55RQT9046Setting MenusHDMI Resolution*You can only select items compatible with the connectedequipment. This setting normally does not need to bechanged. However if you are concerned about outputpicture quality, it may be improved by changing the setting.To enjoy High Quality Video up-converted to 1080p, youneed to connect the unit directly to a 1080p-compatibleHDTV. If this unit is connected to an HDTV throughother equipment, it must also be 1080p compatible.After selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “HDMI Resolution”,thene, r to select the item, then[Auto] Automatically selects the output resolutionbest suited to the connected television(1080p, 1080i, 720p or 480p).[480i][480p][720p][1080i][1080p] When setting video output to “1080p”, werecommend using a Panasonic HIGH SPEEDHDMI cable to prevent video distortion.24p Output for DVD-Video*Can be set when you make the HDMI connection witha TV supporting 24pWhen this unit is connected to a TV supporting1080/24p output via an HDMI cable, this unit displayseach frame at 1/24 second intervals - the same intervaloriginally shot with the film camera.After selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “24p Output for DVD-Video”, thene, r to select “On” or “Off”, then[On] Set to “On” and then set “Progressive/24p”in the Video Menu in the On-Screen Menu(➔ 43) to “24p”. When the video is beingoutput in 24 frames per second, no video isoutput from a video terminal other than theHDMI terminal.HDMI Output Display Aspect*Settings used when 4:3 aspect video is output on thetelevision as 16:9 aspect.After selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “HDMI Output DisplayAspect”, then•e, r to select “Full” or “Normal”,then[Full] Video output is enlarged to match the screensize.[Normal] Video is output as 4:3 aspect. Side panels(black bars on the left and right) will appearon the screen.HDMI RGB Output Range*Effective when connected to a device that onlysupports RGB output.After selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “HDMI RGB OutputRange”, thene, r to select “Standard” or“Enhanced”, then[Enhanced] When the black and white images are notdistinct.HDMI Audio OutputAfter selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “HDMI Audio Output”,thene, r to select “On” or “Off”, then[Off] Audio is output from an amplifier when using theDIGITAL AUDIO OUT terminal (➔ 60).VIERA Link*After selecting “Functions of HDMI” (➔ 54, step 3)e, r to select “VIERA Link”, thene, r to select “On” or “Off”, then[On] When “On” is selected, you can operate other“HDAVI Control” compatible devices using“HDAVI Control”.NotesDepending on the equipment to connect, some items maybe shaded in gray on the display and cannot be selected, orchanging settings may be unavailable.*Above items can be set when you set “HDMI Priority” to “On”.