Panasonic DMR-EZ28K Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

27RQT9046Advanced FeaturesQuick View (Play x1.3)RAMAllows you to increase the play speed slightly withoutdistorting the audio.During playback(Press and hold.)Press again to return to normal speed.–Slow-motion PlayRAM -R -R DL -RW(V) +R +R DL +RWDVD-V -RW(VR)While pausedorThere are 5 slow-motion speeds. Each pressincreases the speed.Press [q PLAY] to restart normal playback.––NotesIf continued for approx. 5 minutes, slow-motion play pausesautomatically (except DVD-V ).Frame-by-Frame ViewingRAM -R -R DL -RW(V) +R +R DL +RWDVD-V -RW(VR)While pausedEach press shows the next or previous frame.Press and hold to advance or reverse frame-by-frame in succession.Press [q PLAY] to restart normal playback.–––Time SlipRAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)Use to skip in 1-minute or 10-minute increments.During playbacke, r to select the time, thenEach press of e or r advances the intervalby 1 minute (press and hold for 10-minuteintervals).–CM SkipRAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)Skips 1-minute forward with each press.During playbackCreate ChaptersRAMDuring playbackTipsYou can skip to the start of a chapter by pressing [u, i].TipsDepending on the disc, some operations may not be possible.Changing Audio during Playbackto select the audio.Available audio will differ based on disc type.See below.RAM -RW(VR) and DivXStereo Mono L Mono Re.g.: RAM“Stereo” isselected.PlayStereoDVD-RAMRAM -RW(VR) When playing an analog multilingualbroadcast, you can choose between Main Audio andSAP Audio.Main Audio SAP AudioDVD-VThis allows you to change items like the audio channelnumber and the soundtrack language (➔ 42).Soundtrack 1 ENG Digital 3/2.1che.g., English is the selected language.NotesIf you cannot change the audio type when you have used only anoptical digital audio cable for connection, set “Dolby Digital” to “PCM”(➔ 52). Alternatively, you may connect to an amplifier or systemcomponent with an audio cable and change the input on the amplifieror system component to suit the connection (➔ 60).