51RQT9046Setting MenusInput LevelAdjusts the black level of the input signal.After selecting “Black Level Control” (➔ 50, step 3)e, r to select “Input Level”, thene, r to select “Lighter” or “Darker”,thenOutput Level (Composite/S Video)Adjusts the black level of the output signal from theVIDEO OUT and S VIDEO OUT terminal.After selecting “Black Level Control” (➔ 50, step 3)e, r to select “Output Level(Composite/S Video)”, thene, r to select “Lighter” or“Darker”, thenDynamic Range CompressionDVD-V (Dolby Digital only)Change the dynamic range (➔ 77) for easier listeningin low volume.Perform step 1 of “Accessing the Setup Menus” (➔ 46).e, r to select “Audio”, then qe, r to select “Dynamic RangeCompression”, thene, r to select “On” or “Off”, thenMulti-channel TV Sound (Analog)-R -R DL -RW(V) +R +R DL +RWSelect whether to record the main or secondary audioprogram (SAP) when recording to these discs. (You cannotselect the audio type on the unit when recording audiofrom an external device. Select it on the external device.)Perform step 1 of “Accessing the Setup Menus” (➔ 46).e, r to select “Audio”, then qe, r to select “Multi-channel TVSound (Analog)”, thene, r to select “Main” or “SecondaryAudio Program (SAP)”, thenMulti-channel TV Sound (Digital)Select the preferred digital broadcast language.Perform step 1 of “Accessing the Setup Menus” (➔ 46).e, r to select “Audio”, then qe, r to select “Multi-channel TVSound (Digital)”, thene, r to select “English”, “French” or“Spanish”, thenDigital Audio OutputChange the settings when you have connectedequipment through the unit’s DIGITAL AUDIO OUTterminal (➔ 60).Perform step 1 of “Accessing the Setup Menus” (➔ 46).e, r to select “Audio”, then qe, r to select “Digital AudioOutput”, thenPCM Down ConversionSelect how to output audio with a sampling frequencyof 96 kHz or 88.2 kHz. Signals are converted to 48 kHzor 44.1 kHz despite the settings if the signals have asampling frequency of over 96 kHz or 88.2 kHz, or thedisc has copy protection.After selecting “Digital Audio Output” (➔ above, step 3)e, r to select “PCM DownConversion”, thene, r to select “On” or “Off”, then[On] Signals are converted to 48 kHz or 44.1 kHz.(Choose when the connected equipmentcannot process signals with samplingfrequency of 96 kHz or 88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz.(Choose when the connected equipment canprocess signals with sampling frequency of 96kHz or 88.2 kHz.)