303 JAN 2006Ver. 5.2DP-3510/3520/3530/4510/4520/4530/6010/6020/60308.4. Installing the Printer Controller Module for GDI-IPX/SPX (DA-GC601)(Not Available in the USA/Canada)8.4.1. ContentsNote:1. The part number may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.8.4.2. InstallationCAUTION!Turn the Power Switch on the Left Side and the Main Power Switch on the Back of themachine to the OFF position, and then unplug the AC Power Cord before beginninginstallation.Qty. Description Part No. Remarks1 Hardware Key ----- GDI KEY1 Installation Instructions DZSM000751(1) Loosen 5 Screws.(2) Remove the Rear Plate as illustrated.(3) Install the Hardware Key into one of the threeavailable connectors (CN67, CN68 or CN69) onthe SC PC Board.Note:The connectors are keyed, to prevent damage tothe SC PC Board, install the Hardware Key asillustrated. Do not force the Hardware Key into theconnector if facing the wrong way.(4) Proceed with the installation of other options.If finished, close and secure the Rear Plate andreinstall remaining Covers.(5) Plug the AC Power Cord into the wall outlet andturn the Main Power Switch on the Back and thePower Switch on the Left Side of the machine tothe ON position.(6) Install the Printer Driver and NetWareSetupWizard into the PC with the OperatingInstructions by following the prompts of theInstallation Wizard.(1)(1)(2)MainPowerSW(3)KEY