394 JAN 2006Ver. 5.2DP-3510/3520/3530/4510/4520/4530/6010/6020/60308.30. Installing the 1 Bin Saddle-Stitch Finisher (DA-FS355A)8.30.1. ContentsNote:1. The part number may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.3. Before you begin the installation of your 1 Bin Saddle-Stitch Finisher (DA-FS355A), readthese entire instructions.8.30.2. InstallationCAUTION!Turn the Power Switch on the Left Side and the Main Power Switch on the Back of themachine to the OFF position, and then unplug the AC Power Cord before beginninginstallation.Qty. Description Part No. Remarks1 1 Bin Saddle-Stitch Finisher See Note1 Stapler PF4117K226A1 Delivery Tray PF4117K225A1 Stand PF4117K604A1 Exit Roller U Assembly DZHP007718 Except for USA andCanada1 Exit Roller Gear 1 (White) FFPMF1069 Except for USA andCanadaUsed for DP-45xx1 E-Ring See Note1 Latch Plate PF4117K101A6 Screw (M4 x 7) See Note4 Silver Screw (M3 x 10) See Note2 Silver Screw (M4 x 30) See Note1 IPC PC Board PF4117P0032 Spacer PF4117K254 Used for DP-45xx1 Label DZNK0043151 Installation Instructions DZSM000759 This document1. Selecting the Installation SiteMake sure that there will be adequate space for thework (i.e. removal of paper, etc.).Make sure also that the Finisher will be placed on thesame floor surface as its host machine(i.e. at the same height, slope, etc.).74.2 in(1885 mm)3.9 in(100 mm)3.9 in(100 mm)3.9 in(100 mm)3.9 in(100 mm)57.6 in(1463 mm)
