314 JAN 2006Ver. 5.2DP-3510/3520/3530/4510/4520/4530/6010/6020/60308.10. Installing the Printer Controller Module for PS / PCL6 (DA-MC600)8.10.1. ContentsNote:1. The part number may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.8.10.2. Installation1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installedinto Slot 1 on the SC PC Board first. Refer to the Installation Instruction of the ProgramExpansion Board (DA-EM600).2. Install the Hardware Key by following the steps below.CAUTION!Turn the Power Switch on the Left Side and the Main Power Switch on the Back of themachine to the OFF position, and then unplug the AC Power Cord before beginninginstallation.Qty. Description Part No. Remarks1 Hardware Key ----- PS KEY1 Software CD DZRQ000123 orDZRQ000124 Includes Operating Instructions1 Adobe Postscript 3 Label DZNK0046471 License Agreement DZSH000112 For USA and Canada only1 DZSH000113 For Other Destinations1 License Agreement(For Adobe PostScript Driver)----- For USA and Canada only1 ----- For Other Destinations1 Installation Instructions DZSM000564 This document(1) Loosen 5 Screws.(2) Remove the Rear Plate as illustrated.(1)(1)(2)MainPowerSW
