340 JAN 2006Ver. 5.2DP-3510/3520/3530/4510/4520/4530/6010/6020/60308.18. Installing the Expansion F-ROM Board (DA-EM600)8.18.1. ContentsNote:1. The part number may differ depending on the Destination.2. Refer to the Parts List in the Parts Manual.8.18.2. InstallationCAUTION!Turn the Power Switch on the Left Side and the Main Power Switch on the Back of themachine to the OFF position, and then unplug the AC Power Cord before beginninginstallation.Qty. Description Part No. Remarks1 Expansion F-ROM Board DZEC1021372 PC Board Support NH-71 Installation Instructions DZSM000756 This document(1) Loosen 5 Screws.(2) Remove the Rear Plate as illustrated.(3) Install 2 PC Board Supporters for the Slot 1 onthe SC PC Board.(4) Install the Program Expansion Board into Slot1 (CN62) on the SC PC Board and secure withthe Supporters.Note:The Program Extension F-ROM Board mustalways be installed into Slot 1 (CN62) for the PCLor PCL/PS Printer Option to function.(5) Proceed with the installation of other options.If finished, close and secure the Rear Plate andreinstall remaining Covers.(6) Plug the AC Power Cord into the wall outlet andturn the Main Power Switch on the Back and thePower Switch on the Left Side of the machine tothe ON position.(1)(1)(2)MainPowerSW(3)(3)(4)
