3Getting StartedVQT8626CLASS 1LASER PRODUCTWARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PLAYER TO RAIN ORMOISTURE.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, ANDANNOYING INTERFERENCE, USE THE RECOMMENDED AC-CESSORIES ONLY.THIS PLAYER IS INTENDED FOR CONTINUOUS OPERATION!NoteThis player can be used only where the power supply is AC 220–240 V, 50 Hz. It cannot be used elsewhere.SAFETY INFORMATIONCAUTION:DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASERPRODUCT. HOWEVER, THIS DVD/VIDEO CD/CDPLAYER USES A VISIBLE LASER BEAM WHICHCOULD CAUSE HAZARDOUS RADIATION EXPO-SURE IF DIRECTED. BE SURE TO OPERATE THEDVD/VIDEO CD/CD PLAYER CORRECTLY AS IN-STRUCTED.WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGEDTO THE WALL OUTLET, DO NOT PLACE YOUR EYESCLOSE TO THE OPENING OF THE DISC TRAY ANDOTHER OPENINGS TO LOOK INTO THE INSIDE OFTHIS PLAYER.USE OF CONTROLS OR ADJUSTMENTS OR PER-FORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUSRADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-SELF. REFER SERVICING TO QUALIFIED PER-SONNEL.CAUTION -LASER RADIATION WHEN OPEN.DO NOT STARE INTO BEAM.ATTENTION-RAYONNEMENT LASER EN CAS D'OUVERTURE.NE PAS REGARDER DANS LE FAISCEAU.VORSICHT -LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.NICHT IN DEN STRAHL BLICKEN.ADVARSEL -LASERSTRÅLING VED ÅBNING.SE IKKE IND I STRÅLEN.ADVARSEL -LASERSTRÅLING NÅR DEKSEL ÅPNES.STIRR IKKE INN I STRÅLEN.VARNING -LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.STIRRA EJ IN I STRÅLEN.VARO! -AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.ÄLÄ TUIJOTA SÄTEESEEN.SAFETYPRECAUTIONSPlacementSet the unit up on an even surface away from direct sunlight, hightemperatures, high humidity, and excessive vibration. These condi-tions can damage the cabinet and other components, thereby short-ening the unit’s service life.Place it at least 15 cm away from wall surfaces to avoid distortionand unwanted acoustical effects.Do not place heavy items on the unit.VoltageDo not use high voltage power sources. This can overload the unitand cause a fire.Do not use a DC power source. Check the source carefully whensetting the unit up on a ship or other place where DC is used.AC mains lead protectionEnsure the AC mains lead is connected correctly and not dam-aged. Poor connection and lead damage can cause fire or electricshock. Do not pull, bend, or place heavy items on the lead.Grasp the plug firmly when unplugging the lead. Pulling the ACmains lead can cause electric shock.Do not handle the plug with wet hands. This can cause electricshock.Foreign matterDo not let metal objects fall inside the unit. This can cause electricshock or malfunction.Do not let liquids get into the unit. This can cause electric shock ormalfunction. If this occurs, immediately disconnect the unit from thepower supply and contact your dealer.Do not spray insecticides onto or into the unit. They contain flam-mable gases which can ignite if sprayed into the unit.ServiceDo not attempt to repair this unit by yourself. If sound is interrupted,indicators fail to light, smoke appears, or any other problem that is notcovered in these instructions occurs, disconnect the AC mains leadand contact your dealer or an authorized service center. Electricshock or damage to the unit can occur if the unit is repaired,disassembled or reconstructed by unqualified persons.Extend operating life by disconnecting the unit from the powersource if it is not to be used for a long time.(Inside of player)(Back of player)