Panasonic DVD-RV60 Operating Instructions Manual

Also see for DVDRV60 -: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

33VQT8626Home TheaterHome theaterSettings in“8 Speaker Setting”Select “1 Multi-channel”≥Speaker presence⇒Set speakers youhave connected to“Yes”≥Set delay time ifnecessary≥Correct outputbalance if necessarySelect “2 2-channel”Select “2 2-channel”Select “2 2-channel”Settings in“7 Digital AudioOutput”PCM DownConversion⇒“No”≥PCM DownConversion⇒“Yes”≥Dolby Digital/DTSDigital Surround/MPEG⇒Settings depend onyour decodingequipmentPCM DownConversion⇒“No”≥PCM DownConversion⇒“Yes”≥Dolby Digital⇒“PCM”≥DTS Digital Surround⇒“PCM”≥MPEG⇒“PCM”∫ Upgrading your audio equipmentTo enjoy the 5.1-channel surroundsound found on DVDsusing the unit’s built-in decoderTo enjoy the 5.1-channel surroundsound found on DVDsusing the decoder inanother unitTo enjoy stereothrough an analogueamplifier§2To enjoy stereothrough a digitalamplifier§2EquipmentAmplifier with 5.1-channel audio inputterminalsAmplifier with built-indecoder or a separatedecoder-amplifiercombination§1Analogue amplifier orsystem component with2-channel audio inputterminalsAudio equipment withdigital audio inputterminalsSpeakers≥Front speakers (L/R)≥Subwoofer≥Surround speakers(L/R)≥Center speaker≥Front speakers (L/R)≥Subwoofer≥Surround speakers(L/R)≥Center speakerFront speakers (L/R)Front speakers (L/R)Page[A]34[B]35[C]36[D\36§1 Connect speakers if necessary and make the speaker settings onthe amplifier.§2 If you have connected a Dolby Pro Logic amplifier, you may needto connect center and surround speakers.∫ Upgrading your television≥You can connect CRT projectors, LCD projectors, and projectiontelevisions.≥See “Connection to a television” (á pages 9 and 10) for details onconnection.Note≥The equipment connections described are examples.≥Additional equipment and cables are not supplied.Setup chartTypes ofconnectionEquipment andsettingsManufactured under license from Digital Theater Systems,Inc. “DTS” and “DTS Digital Surround” are trademarks ofDigital Theater Systems, Inc. C 1996 Digital Theater Sys-tems, Inc. All rights reserved.Manufactured under license from Dolby Laboratories. “Dolby”,“Pro Logic” and the double-D symbol are trademarks of DolbyLaboratories. Confidential unpublished works. C 1992–1997Dolby Laboratories. All rights reserved.For your reference≥Dolby Digital is a digital sound compression technique developedby Dolby Laboratories.Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sounddata to be efficiently recorded on a disc.≥DTS Digital Surround is a 5.1-channel surround sound system,which is widely used in movie theaters around the world. Theseparation between channels is good and provides a very realsurround effect.≥Linear PCM is an uncompressed digital audio signal. While a CD isrecorded in 44.1 kHz/16 bit, a DVD is recorded in 48 kHz/16 bit upto 96 kHz/24 bit. Therefore, the sound reproduced with thesesignals is potentially better than that found on CDs. This playerreproduces linear PCM in two channels.≥Bitstream is a compressed digital audio signal. This signal can bedecoded into different channels to produce, for instance, 5.1-channel surround sound.≥The digital audio output terminal (optical) converts electrical signalsinto optical signals and transfers them to an amplifier. These opticalsignals are immune to electrical interference, and they also haveminimal effect on other equipment.