Panasonic DVD-RV60 Operating Instructions Manual

Also see for DVDRV60 -: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

36VQT8626Home TheaterOPTICAL COAXIALSURROUNDSURROUNDCENTERDIGITAL AUDIO OUT(PCM/BITSTREAM)SUB–WOOFERR R/FRONT RL/FRONT L AUDIO OUT VIDEO OUTS VIDEO OUTL LROPTICAL COAXIALOPTICAL COAXIALSURROUNDSURROUNDCENTERDIGITAL AUDIO OUT(PCM/BITSTREAM)SUB–WOOFERR R/FRONT RL /FRONT L AUDIO OUT VIDEO OUTS VIDEO OUTL LRRLAUX INNote when connecting the optical digital audio cable≥Remove the dust protection cap from the optical digital audiooutput terminal and connect the cable firmly so that the configu-rations of both the cable and the terminal match.≥Keep the dust protection cap and reattach when not using theterminal.Home theaterªC Connecting audio equipment with 2-channel audio input terminalsYou can enjoy stereo sound if you connect an amplifier or system component that has 2-channel audio input terminals.Amplifier and speakers or system component≥Read the instructions for the amplifier and speakers orsystem component for connection details.When you have finished connection≥Go to “7 Digital Audio Output” and set “1 PCM Down Conversion” to“No” (á page 37).≥In “8 Speaker Setting”, select “2 2-channel” (á page 39).Note≥Additional equipment and cables are not supplied.Audio cableªD Connecting audio equipment with digital audio input terminalsWhen you have finished connection≥Make changes to “7 Digital Audio Output” as shown (á page 37).Back of the playerDust protection cap Align the plug withthe terminalOptical digital audio cable≥Do not bend the optical digital audio cable when connecting it.Coaxial audio cableSystem component or amplifier with digital audio input termi-nals and speakers≥Read the instructions for the amplifier and speakers or system com-ponent for connection details.≥These changes to digital audio output must be made,otherwise signals the equipment cannot handle, bitstream, willbe output. If the signals are output as bitstream, “noise” will beoutput which can cause harm to your ears and speakers.≥In “8 Speaker Setting”, select “2 2-channel” (á page 39).Note≥Additional equipment and cables are not supplied.ORPCM Down ConversionDolby DigitalDTS Digital SurroundMPEGYes§PCMPCMPCMDolby Pro Logic amplifiers≥If you connect a Dolby Pro Logic amplifier, you willalso need to connect center and surround speakers toenjoy surround sound. Read the instructions for theequipment for connection details.≥Turn V.S.S. off (á page 23). Dolby Pro Logic will notfunction correctly if V.S.S. is on.Back of the player§ If this is set to “No”, no audio will be output when DVDs recorded in96 kHz linear PCM are played. (Audio will be output as it is if theDVD does not have copyright protection recorded on it.)