34VQT8626Home TheaterHome theatreªA Connecting an amplifier with 5.1-channel audio input terminalsThis unit has a built-in Dolby Digital/DTS Digital Surround decoder so you can enjoy surround sound encoded with these systems without having toconnect this unit to an amplifier with a decoder. The amplifier must have 5.1-channel discrete input terminals.Home theaterWhen you have finished connection≥In “8 Speaker Setting”, select “1 Multi-channel” and make changes to suit your speakers (á page 39).Speaker presence: Select “Yes” if the corresponding speaker is connected.Select “No” if the corresponding speaker is not connected.Center and surround speaker delay time (Dolby Digital DVD only) : Adjust if you cannot place your speakers in the optimum position.Channel balance: Adjust the output level of the speakers to make up for differences in volume caused by different types of speaker ordistance.≥Go to “7 Digital Audio Output” and set “1 PCM Down Conversion” to “No” (á page 37).Note≥Turn off V.S.S. (á page 23) if you have connected a subwoofer, center speaker, or surround speakers as well as the front speakers. Sound will notcome from the other speakers if V.S.S. is on.≥When playing DVDs recorded in MPEG 2 audio, multi-channel audio will be output as well as Dolby Digital or DTS Digital Surround.≥Additional equipment and cables are not supplied.Amplifier with 5.1-channel audio input terminals≥Read the instructions for the amplifier and speakers for connectiondetails.Speakers(You can connect from 3 to 5 speakers including the front two.)≥Front speakers (L/R)≥Center speaker≥Surround speakers (L/R)≥SubwooferBack of the playerAudio cable≥Connect cables to terminals corresponding to the speakers youhave connected.OPTICAL COAXIALSURROUNDSURROUNDCENTERDIGITAL AUDIO OUT(PCM/BITSTREAM)SUB–WOOFERAC INR R /FRONT RL /FRONT L AUDIO OUT VIDEO OUTS VIDEO OUTAV1AV2L LRCENTER SUB-WOOFERSURROUND(L) (R) (L) (R)FRONT