Panasonic DVD-RV60 Operating Instructions Manual

Also see for DVDRV60 -: Operating instructions Operating instructions Operating instructions Operating instructions Service manual

31VQT8626Advanced Operations1 Automatic (Factory preset)2 FieldSelect this setting when jittering occurs in the still picturemode when “1 Automatic” is selected.3 FrameSelect if small text or fine patterns cannot be seen clearly inthe still picture mode when “1 Automatic” is selected.1 On (Factory preset)2 Off1 Pan & Scan (Factory preset)Wide-screen video material will be played in the pan andscan style (the picture is shown with either one or both sidescut off) on a conventional television (4:3).≥Video material not formatted in the pan and scan style willbe played back in the letterbox style.2 LetterboxWide-screen video material will be played in the letterboxstyle (black bands appear at the top and bottom of thescreen) on a conventional television (4:3).1 Off (Factory preset)The dynamic range remains as it was recorded on the disc.2 OnDynamic range is compressed by increasing soft sounds andreducing loud sounds. Select when viewing discs at lowvolume, such as late at night.1 Off (Factory preset)2 On1 Video (Factory preset)Composite video signals will be output.2 S-VideoS video signals will be output.3 RGBRGB signals will be output.1 PAL 60 (Factory preset)Select when the player is connected to a PAL TV which iscapable of receiving PAL 525/60 system.2 NTSCSelect when the player is connected to a Multi-systemtelevision.Changing initial settings9 Other SettingsSee page 27 for operation.Example: P-picture1 Still ModeSelect either “Field still” or“Frame still” in the stillpicture mode.2 Audio during SearchTo select whether audio isheard or not during search(forward direction) at theinitial search speed.3 TV Mode (4:3)To select whether wide-screen material is playedin the pan and scan styleor in the letterbox style ona conventional TV (4:3).4 D.(Dynamic) RangeCompressionTo compress the dynamicrange (the differencebetween the loudest soundand the softest sound),making it easier to heardialogue even at lowvolume. This function onlyworks with Dolby DigitalDVD.5 Still Picture DisplayTo display the picture type(DVD), I, P or B in the stillpicture mode.6 AV1 OutputTo select the signal format(Video, S-Video or RGB)to be output from the AV1SCART terminals.7 NTSC Disc OutputTo select whether PAL 60signals or NTSC signalswill be output duringplayback of NTSC discs.(Continued on next page)Other Settings1 Still Mode2 Audio during Search3 TV Mode (4:3)4 D. Range CompressionAutomatic5 Still Picture DisplayOnPan&ScanOffOff6 AV1 Output Video7 NTSC Disc Output PAL60Press RETURN to exitStill (P)