40VQT8626Home TheaterABCLSLSLS RSL RSWD SD FD CCPress RETURN to exitSpeaker SettingExitTest0dB0dB0dB 0dB0ms0msLS RSCSWL RPress RETURN to exitSpeaker SettingExitTest0dB0dB0dB 0dB0ms0msLS RSCSWL RPress RETURN to exitSpeaker SettingExitTest0dB0dB0dB 0dB0ms0msLS RSCSWL RHome theaterSetting the size and presence of yourªA speakers1. Press the cursor buttons [3, 4, 2, 1] to select the item andpress [ENTER].2. Press the cursor buttons [3, 4] to select the setting andpress [ENTER].≥Large speaker iconIf the speaker supports low-frequency (under 100 Hz) reproduction≥Small speaker iconIf the speaker does not support low-frequency reproduction.≥If you do not connect a subwoofer, it is preferable to connect frontspeakers (L/R) capable of producing bass of less than 100 Hz.ªB Delay time[DVD] (Dolby Digital only)1. Press the cursor buttons [3, 4, 2, 1] to select the item andpress [ENTER].2. Press the cursor buttons [3, 4] to adjust the delay time andpress [ENTER].≥≥≥≥≥Center speakerSet delay time to “0 ms” (factory preset) if D F is less than orequal to D C.≥≥≥≥≥Surround speakerSet delay time to “0 ms” (factory preset) if DF and DS are equal.ªC Channel balance1. Press the cursor buttons [3, 4, 2, 1] to select “Test” andpress [ENTER].A test signal is output from one speaker at a time, starting with thefront left speaker and proceeding clockwise.FRONT(L) = =) CENTER = =) FRONT(R)vSURROUND(L) (======== SURROUND(R)2. While listening to the test signal, press the cursor buttons[3, 4] to adjust the volume of the center and surroundspeakers so they are the same apparent volume as the frontspeakers. (The front speakers cannot be adjusted here.)3. Press [ENTER]. (The test signals are stopped.)Note≥A test signal is not output from the subwoofer. To adjust its volume,play something, then return to this screen to adjust to your taste.Large/Yes Small/YesNoCenter delay time(0 ms)Surround delay time(0 ms)Centerchannel balance (0 dB)Surround (R)channel balance (0 dB)Surround (L)channel balance (0 dB)Subwooferchannelbalance(0 dB)TestsignalIdeal center speaker positionIdeal surroundspeaker positionPlace all your speakers within this circumferenceIn case of surround speaker (L)CenterLarge/Small/NoExitSurround (R)Large/Small/NoFront (L)Large/SmallSubwooferYes/NoFront (R)Large/SmallSurround (L)Large/Small/No≥Underlined items are factory preset.≥Underlined items are factory preset.≥Underlined items are factory preset.If DFjD S=approx. 200 cmapprox. 400 cmapprox. 600 cmthen set to5.3 ms10.6 ms15.9 msIf DFjD C=approx. 50 cmapprox. 100 cmapprox. 150 cmapprox. 200 cmthen set to1.3 ms2.6 ms3.9 ms5.3 msv