Panasonic Diga DMR-EZ27EB Operating Instructions Manual

Also see for Diga DMR-EZ27EB: Reference guide

Contents

43RQT8856Setting MenusPlay MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR) CD VCDRepeat PlayThis function works only when the elapsed play time isdisplayed.Select the item for repeat play. Depending on the disc, theitems that can be selected will differ.Select “Off” to cancel.Picture MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)You can change the progressive output setting and the noisereduction setting when playing discs or of images from theconnected device.Playback NR“On” reduces noise and picture degradation.Progressive [Only when you have set “Progressive” to “On”in the Setup menu (➔ 50)]Select “On” to enable progressive output.Select “Off” if the picture is stretched horizontally.Transfer [Only when you have selected “On” in “Progressive”(➔ above)]Select the method of conversion for progressive output to suitthe type of material being played.When the output signal is PAL(When the tray is opened, the setting will return to “Auto”.)Auto: Automatically detects the film and videocontent, and appropriately converts it.Video: Select when using “Auto”, and the content isdistorted.Film: Select this if the edges of thefilm content appear jagged orrough when “Auto” is selected.However, if the video content is distorted asshown in the illustration to the above, thenselect “Auto”.When the output signal is NTSCAuto1 (normal): Automatically detects the film and videocontent, and appropriately converts it.Auto2: In addition to “Auto1”, automatically detectsfilm contents with different frame rates andappropriately converts it.Video: Select when using “Auto1” and “Auto2”, andthe content is distorted.AV-in NR(Only when AV1, AV2, AV3 or DV is selected)Reduces video tape noise during recording. Depending onthe video signal, jittering may occur.Automatic: Noise reduction only works on picture input froma video tape.On: Noise reduction works for any video input.Off: Noise reduction is off. Select when you want torecord input as is.•Sound MenuYou can change the settings of audio when receiving themulti-channel broadcast, and also change the settings ofsound effect when playing discs.DVB Multi Audio(MPEG Audio only)If more than one audio channels are output, you can set thedesired channel before recording.DVB Multi Audio cannot be selected during playback orrecording.Depending on the broadcast, the items that can be selectedwill differ.English 1/ English 2RAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)V.S.S. (Dolby Digital, MPEG Audio with 2.0 or over channelsonly)This function does not work for bilingual recordings.Enjoy a surround-sound effect if you are using 2 frontspeakers (L/R) only.Turn off if it causes distortion.Natural / Emphasis / OffDialog Enhancer (Dolby Digital, 3-channel or over only,including a center channel)When “On”, the volume of the center channel is raised tomake dialogue easier to hear.Other MenuPositionChange where this menu screen appears on your TV.•••••