Panasonic Diga DMR-EZ27EB Operating Instructions Manual

Also see for Diga DMR-EZ27EB: Reference guide

Contents

50RQT8856Display and Connection SettingsTo Others Setup(➔ 46, Accessing the Setup Menu)All factory default settings are indicated with “Underlined” text.Displaye, r select “Display” ➔ q ➔ e, rselect item ➔SetupTuningDiscPictureSoundDisplayConnectionOthersDVB Preferred SubtitlesOn-Screen MessagesFL DisplayNew Service MessageEnglish5 sec.BrightAutomaticSELECTTABRETURNDVB Preferred SubtitlesChoose the subtitle language for digital broadcast.If the selected subtitle is not available, then the available subtitlewill be shown.[English] [Welsh] [Gaelic][English for hearing impaired][Welsh for hearing impaired][Gaelic for hearing impaired]On-Screen MessagesChoose the approximate time until the digital channel informationscreen (➔ 32) disappears automatically.The length of time the control panel (➔ 35) is displayed can alsobe changed, but “Off” does not work.[Off] The digital channel information is not displayed.[3 sec.] [5 sec.] [7 sec.] [10 sec.]FL DisplayChanges the brightness of the unit’s display.Regardless of the setting, when “Power Save” (➔ 52) is “On” andthis unit is turned off, the unit’s display is turned off.[Bright][Dim]New Service MessageWhen a new DVB channel is added this unit will be informedautomatically. Then the confirmation message appears. Ifyou select “Yes” on the display, Auto Setup starts (all channelsettings and all created profiles are deleted. The timer recordingprogrammes are also cancelled.).[Automatic][Off] The Service Messages are not shown.Connectione, r select “Connection” ➔ q ➔ e, rselect item ➔SetupTuningDiscPictureSoundDisplayConnectionOthersTV AspectProgressiveTV SystemHDMI Settings16:9OffPALSELECTTABRETURNAV1 Output RGB 2AV2 SettingsTV AspectThis setting needs to be changed when connected to a 4:3standard aspect TV.Press [e, r] to select the TV Aspect then press [OK].[16:9] [4:3] [Letterbox]SetupTuningDiscPictureSoundDisplayConnectionOthersTV Aspect16:94:34:3 TV16:9 WIDE TVLetterboxOKSELECTRETURNNotesAspect 4:3/16:94:3 16:94:3 standard aspect television 16:9 widescreen television• 16:9: When connected to a 16:9 widescreen television.However, the 4:3 aspect ratio picture expands left andright.• 4:3: Side picture is trimmed for 16:9picture (➔72, Pan & Scan).Letterbox: When connected to a 4:3aspect television, widescreenpicture is shown in the letterboxstyle (➔ 72).••ProgressiveYou can enjoy progressive video by connecting this unit’sCOMPONENT VIDEO OUT terminals to an LCD/plasma televisionor LCD projector compatible with progressive scan (➔ 72).Before this setting, set “AV1 Output” to “Video (with component)” or“S Video (with component)” (➔ 51).Press [e, r] to select “On” then press [OK].[On] Output becomes progressive.[Off]This setting is fixed with “Off” and there is no output from theCOMPONENT VIDEO OUT terminals if you set “AV1 Output” to“RGB 1 (without component)” or “RGB 2 (without component)”(➔ 51).NotesWhen connected to a regular television (CRT: Cathode raytube) or a multi-system television using PAL mode, even if it isprogressive compatible, progressive output can cause someflickering. Turn off “Progressive” if this occurs (➔ 43).Picture will not be displayed correctly if connected to anincompatible television.••