Panasonic Diga DMR-EZ27EB Operating Instructions Manual

Also see for Diga DMR-EZ27EB: Reference guide

Contents

8RQT8856Basic ConnectionBefore connection, turn off the mains for all connected equipment and read the appropriate operatinginstructions.Be sure to read the Caution for AC Mains Lead on page 3.Connecting to a Television onlyRF IN AV INRear of this unitTo household mains socketstepTo householdmains socketstepAV1(TV)COMPONENTVIDEO OUT AV OUTAV2(EXT)stepRear of TVstep11To the aerial RF coaxial cable (included, grey)RF coaxial cable (included, black)orTo this unitUse one of the RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.stepstep2 344Connections other than the 21-pin Scart cable 55 –57The RF coaxial cable cannotbe used for showing picturesfrom the unit. The unit mustbe connected by anothermeans e.g. 21-pin Scart cableto show pictures from the uniton the television set.RF coaxial cable (included) from the aerial socket or aerial cable to the “RF IN” on the unit.RF coaxial cable (included, black) from the “RF OUT” on the unit to the “RF IN” on the TV.21-pin Scart cable from the “AV1 (TV)” on the unit to the “AV IN” on the TV.AC mains lead (included) from the “AC IN~” on the unit and the TV to a household mainssocket.After completing the above connections, proceed to the TV Tuning (➔ 10).•Use of the supplied RF coaxial cableTo prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when youconnect this unit to your TV and aerial outlet or aerial cable and Satellite receiver.Keep the RF coaxial cables as far away as possible from other cables.Do not roll up the RF coaxial cables.••