Panasonic Diga DMR-EZ27EB Operating Instructions Manual

Also see for Diga DMR-EZ27EB: Reference guide

Contents

9RQT8856Before connection, turn off the mains for all connected equipment and read the appropriate operatinginstructions.Be sure to read the Caution for AC Mains Lead on page 3.Adding a Satellite Receiver-Connecting to a Television and a Satellite ReceiverAV1TV)COMPONENTVIDEO OUT AV2(EXT) AV OUTRF IN AV INRear of TVTo household mains socketTo the aerialTo householdmains socketRear of satellite receiverRF OUT AV OUTTo household mains socketsatellite antennaRF IN2step5step 6step3step 4step6stepRear of this unit6step1stepConnections other than the 21-pin Scart cable 55 –57The RF coaxial cable cannotbe used for showing picturesfrom the unit. The unit mustbe connected by anothermeans e.g. 21-pin Scart cableto show pictures from the uniton the television set.RF coaxial cable from the aerial to the “RF IN” on the satellite receiver.RF coaxial cable (included, black) from the “RF OUT” on the satellite receiver to the “RF IN” onthe unit.RF coaxial cable (included, black) from the “RF OUT” on the unit to the “RF IN” on the TV.21-pin Scart cable from the “AV1 (TV)” on the unit to the “AV IN” on the TV.21-pin Scart cable from the “AV OUT” on the satellite receiver to the “AV2 (EXT)” on the unit.AC mains lead (included) from the “AC IN~” on the unit, the TV and the satellite receiver to ahousehold mains socket.After completing the above connections, proceed to the TV Tuning (➔ 10).To view satellite programmesRefer to “Watching Satellite Programmes” (➔ 12).To record satellite programmesRefer to “Recording from a Satellite Receiver” (➔ 21).•Quick Start Guide STEP 2Using a fully wired 21-pin Scart cableYou can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ 34).You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.“AV1 Output” in the Setup menu is set to “RGB 1 (without component)” or “RGB 2 (without component)” (➔ 51).“AV2 Input” settings in the Setup menu (➔ 51)–––