Panasonic ET-YFB200G Operating Instructions Manual

Contents

Panasonic ET-YFB200G Operating Instructions Manual Manual pdf 22 page image

Chapter 2 Getting Started — Connecting22 - ENGLISHConnectingBefore connectingf Before connecting, carefully read the Operating Instructions of the equipment to be connected.f Turn off the power of all devices before connecting cables.f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.g When connecting the cable to this device or to the equipment to be connected with this device, touch a metalobject around you to discharge the static from your body before holding the cable.g Do not use unnecessarily long cable when connecting this device and the display (projector or flat paneldisplay). Longer the cable is, easier to be influenced by a noise. If the cable is used in a winding condition, itbecomes an antenna, which more easily gets influenced by a noise.g When connecting cables, connect GND first, then insert the connecting terminal of the connecting equipmentin a straight manner.f If connecting cables necessary for the system connection are not supplied with the connecting equipment asaccessories or not available as an option, prepare cables that are compatible with the connecting equipment.f If video signals from video equipment contain too much jitter, the images on the screen may wobble. In thiscase, a time base corrector (TBC) must be connected.f Signals that can be connected to this device are video signal, Y/C signal, YC BC R /YPBPR signal, analog RGBsignal (synchronization signal is TTL level), and HDMI signal.f Some computer models are not compatible with this device.f For details of the video signal supported by this device, refer to “Compatible signals” (x page 88). terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal name(10) (6)(11)(15)(1)(5)(1) R/P R /C (9) ―(2) G/Y/Y (10) GND(3) B/PB (11) GND(4) ― (12) DDC data(5) GND (13) HD/SYNC(6) GND (14) VD(7) GND (15) DDC clock(8) GND terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal name(10) (6)(11)(15)(1)(5)(1) R/P R (9) ―(2) G/Y (10) GND(3) B/P B (11) GND(4) ― (12) DDC data(5) GND (13) HD/SYNC(6) GND (14) VD(7) GND (15) DDC clock(8) GND