Chapter 4 Settings — [OPTION] menuENGLISH - 61[SUBNET MASK] Enter the subnet mask when a DHCP server is not used.[DEFAULT GATEWAY] Enter the default gateway address when a DHCP server is not used.[STORE] Saves the current network setting.6) Press as to select [STORE], and press the button.Notef If a DHCP server is to be used, confirm that the DHCP server is running.f Check with the network administrator for the IP address, subnet mask, and default gateway.Setting [NETWORK CONTROL]Set the control method of the network.1) Press as to select [NETWORK].2) Press the button.f The [NETWORK] screen is displayed.3) Press as to select [NETWORK CONTROL].4) Press the button.f The [NETWORK CONTROL] screen is displayed.5) Press as to select each item, and press qw to change the setting.[WEB CONTROL]To use the web control, and to use the browser remote control, set to [ON].For details, refer to “Using the web control function” (x page 66), “Using the browser remotecontrol” (x page 73).[PJLink CONTROL] Set to [ON] to control with the PJLink protocol.[COMMAND CONTROL] Set to [ON] to control with control command format (x page 86) of the terminal.For details, refer to “Control commands via LAN” (x page 80).[COMMAND PORT] Sets the port number to use with the command control.[STORE] Saves the current network control setting.6) Press as to select [STORE], and press the button.Displaying [NETWORK STATUS]Display the network status of the device.1) Press as to select [NETWORK].2) Press the button.f The [NETWORK] screen is displayed.3) Press as to select [NETWORK STATUS].4) Press the button.f The [NETWORK STATUS] screen is displayed.[DHCP] Displays the usage status of the DHCP server.[IP ADDRESS] Displays [IP ADDRESS].[SUBNET MASK] Displays [SUBNET MASK].[DEFAULT GATEWAY] Displays [DEFAULT GATEWAY].[DNS1] Displays the address of the preferred DNS server.[DNS2] Displays the address of the alternate DNS server.[MAC ADDRESS] Displays [MAC ADDRESS].[STATUS]Display the status of the device.1) Press as to select [STATUS].
