Chapter 4 Settings — [POSITION] menuENGLISH - 45f Optimal value may not be achieved when there is a shift in the total dot numbers.f [CLOCK PHASE] can be adjusted only when the signal is input to the terminal or the terminal.However, [CLOCK PHASE] cannot be selected when Y/C signal, YCBC R signal (480i, 576i), or analog RGB signal (480i, 576i) is input.f [CLOCK PHASE] cannot be adjusted when video signal or HDMI signal is input.[OVER SCAN]f Only when video signal, Y/C signal, YC B C R /YPBPR signal, analog RGB signal (moving image), or HDMI signal(moving image) is inputAdjust the setting when character or image at the edge of the projected or displayed image is cropped.1) Press as to select [OVER SCAN].2) Press qw or the button.f The [OVER SCAN] individual adjustment screen is displayed.3) Press qw to adjust.f Adjustment value is between [0] and [+10].[ASPECT]Switch the aspect ratio of the image output from the terminal, the 2> terminal, or the terminal.1) Press as to select [ASPECT].2) Press qw or the button.f The [ASPECT] individual adjustment screen is displayed.3) Press qw to switch items.f The item is switched every time the button is pressed.Aspect mode Description[AUTO]*1 Recognizes the video ID (VID) embedded in the video signal, and outputs the image by automaticallyswitching to 4:3 or 16:9 image size.[NORMAL]Maintains the aspect ratio of the input signal and outputs the image so that it is not cropped.Outputs the image using all the vertical display valid region of the connected image display devicewhen the standard signal *2 is input. Outputs the image using all of either the horizontal or the verticaldisplay valid region of the connected image display device when the wide signal *3 is input.[WIDE] Outputs the image by converting the aspect ratio to 16:9 or 15:9 when the standard signal *2 is input.Outputs without changing the aspect ratio of the input when the wide signal *3 is input.[S16:9] *4 Outputs the image matching 4:3 image size maintaining the aspect ratio when the wide signal *3 isinput.[H FIT] Outputs the image using all the horizontal display valid region of the connected image display devicemaintaining the aspect ratio of the input signal.[V FIT] Outputs the image using all the vertical display valid region of the connected image display devicemaintaining the aspect ratio of the input signal.[FULL] Outputs the image using all the display valid region of the connected image display device.[NATIVE] Displays the image in the resolution of the input signals without changing.*1 Only when video signal (NTSC), Y/C signal (NTSC), YCBC R signal (480i) are input.*2 Standard signal is a signal with an aspect ratio of 4:3 or 5:4.*3 Wide signal is a signal with an aspect ratio of 16:10, 16:9, or 15:9.*4 Only when the wide signal is input.Notef The image that is actually displayed may not change depending on the input signal even when the [ASPECT] setting is changed.f The image may look different from the original image when the aspect ratio is set to different one as the one for input signal. Taking care ofthis point when setting [ASPECT].f The copyright of the original copyright owner protected by the copyright laws may be violated when an image is compressed or expandedusing the device at cafe, hotel, etc., for a commercial purpose or public presentation. Take caution when using the function of the devicesuch as aspect adjustment.f Part of the peripheral image may not display or be distorted when a conventional (normal) 4:3 image that is not a wide image is projected ordisplayed in a wide screen. View the original image respecting the intention of the creator in 4:3 image.[INPUT RESOLUTION]Adjust the setting to achieve an optimal image when a flickering or smearing edge appears on the image.1) Press as to select [INPUT RESOLUTION].
