|
Chapter 4 Settings — [OPTION] menu62 - ENGLISH2) Press the button.f The [STATUS] screen is displayed.[INPUT SIGNAL] [NAME] Displays the input signal name.[FREQUENCY] Displays the frequency of the input signal.[OUTPUT SIGNAL] [NAME] Displays the output signal name.[FREQUENCY] Displays the frequency of the output signal.[SERIAL NUMBER] [ET-YFB200] Displays the serial number of the device.[INITIALIZE]Return various setting values to their factory default settings.After executing this operation, turn off and then turn on the button of the device.1) Press as to select [INITIALIZE].2) Press the button.f The [INITIALIZE] screen is displayed.3) Press as to select the item to initialize.[USER DATA] Returns various setting values to their factory default settings except [NETWORK SETUP].[NETWORK] Returns [NETWORK SETUP] to the factory setting.4) Press the button.f A message [To do the initialization, the unit will need to be turned off.] is displayed.5) Press qw to select [OK], and press the button.f [Please turn off the DIGITAL LINK switcher, then turn it back on again.] is displayed.6) Press the button to turn off the power.7) Press the button again to turn on the power.f All input terminal indicators will light up during the initialization. Wait until all input terminal indicators otherthan the selected input terminal turn off.For the details regarding input terminal indicator, refer to “Control panel” (x page 17).Notef Input is set to COMPUTER 1 when [USER DATA] is executed.
|
