Wiring3-23.1 Connection over Wire-pressed Terminal Cable3.1.1 Specifications of Wire-pressed Terminal CableThis is a connector that allows loose wires to be connected without removing the wires’insulation. The pressure connection tool is required to connect the loose wires.Suitable wires (strand wire)Size Nominal cross-sectional area Insulationthickness Rated currentAWG#22 0.3 mm 21.5 to 1.1 dia. 3 AAWG#24 0.2 mm 2Connector for wire-pressed terminal cable (provided with the unit)Manufacturer Composition of parts Unit type and required quantity2-axis type 4-axis typePanasonic madeHousing (40P) 1 x 1 set 1 x 2 setsSemi-cover (40P) 2 x 1 set 2 x 2 sets5-pin contact (for AW22 and AW24) 8 x 1 set 8 x 2 sets(Note) One set is provided for the 2-axis type and two sets are provided for the 4-axis type. If you need moreconnectors, purchase AFP2801 (2 sets/pack).Pressure connection toolManufacturer Product no.Panasonic made AXY52000FPPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
