Settings and Printing19NOTES:• If using the Network interface cable, be sure to connectthe printer with a network interface cable and to turn it on.• If using the Parallel or USB interface cable, be sure to turnoff the printer or not to connect the printer with an interfacecable to avoid the Plug and Play installation.■ For WindowsThere are the following two methods to install the printerdriver for Windows.• Automated Driver Installation• Custom Driver InstallationThis Setup Guide only briefly explains Automated DriverInstallation. For detailed instructions, refer to theInstallation section.NOTE:• For Windows NT 4.0, Windows 2000, Windows XP andWindows Server 2003, make sure to log on as anadministrator.1 Insert the printer CD-ROM into the CD-ROM drive.The CD-ROM launches automatically.NOTE:• If the CD-ROM does not launch automatically,perform the following steps (1) - (2).(1) Double-click the My computer icon.(Windows XP / Windows Server 2003: Start -My Computer)(2) Double-click the CD-ROM icon.2 Click Install Printer Driver.3 Click Automated Driver Installation.The License Agreement window is displayed.4 Click [Yes].The Printer port selection window is displayed.5 [A] When using the Network interface cable:Click on Select the Network port for KX-CL400check button, and select the printer of the IP Addressconfirmed on the Configuration Page (refer to“Printing the Configuration Page” on page 17).[B] When using the Parallel interface cable:Click on Select an existing printer port checkbutton, and click on the LPT port (Example: LPT1).[C] When using the USB interface cable:Click on Install via the USB port (plug and playinstallation) check button.6 Click [Next>].The Installed Options window is displayed.7 Click on the check box of the installed options in yourprinter and select the total memory from the Memorylist, and click [Next >].The setup program starts installing the printer driver.8 [A] When using the Network interface cable:(1) Click [Finish].[B] When using the Parallel interface cable:(1) Click [Finish] and turn the printer on.If the Welcome to the Found New HardwareWizard window is displayed, refer to theInstallation section.[C] When using the USB interface cable:NOTE:• For Windows 98, only Windows 98 SE is availablewhen using a USB interface.(1) When the Connect the printer to the computerwindow is displayed, connect the USB interfacecable and turn the printer on.Perform the following steps depending on theoperating system:For Windows 98 / Windows Me:(2) When the InstallShield Wizard Completewindow is displayed, click [Finish].For Windows 2000:(2) If the Digital Signature Not Found window isdisplayed, click [Yes].The InstallShield Wizard Complete window isdisplayed.(3) Click [Finish].For Windows XP / Windows Server 2003:(2) If the Welcome to the Found New HardwareWizard window is displayed, refer to theInstallation section.(3) Click [Finish].NOTE:• Restarting of the computer may be requireddepending on your computer environment. In thiscase, restart your computer.■ For Windows (with Upgrade Kit)When installing the printer driver for the printer equippedwith the Upgrade Kit, use the printer CD-ROM providedwith the Upgrade Kit.The Automated Driver Installation is the same with theabove steps. For detailed instructions, refer to theInstallation section.Installing Printer DriverSettings and Printing