Panasonic KX-FPG379 Operating Instructions Manual

Contents

Panasonic KX-FPG379 Operating Instructions Manual Manual pdf 44 page image

3. Telephone42L After viewing “×2” to “×9” will be replacedwith a “,”.To stop viewingPress {STOP} after step 2 on page 41.To edit a telephone number before callingback/storingPress {*} repeatedly after step 2 on page 41.Each time you press {*}, the telephone numberwill be changed as follows:1 Local telephone number only (area codeomitted)2 Area code – Local telephone number3 1 – Area code – Local telephone number (“1”added)L To return a call, press {SP-PHONE}.L To store the number in the phone book, followfrom step 3 of the base unit storing procedureon page 44.Note:L The unit provides an auto edit feature forCaller ID numbers. For details, see page 42.3.10 Caller ID number autoedit featureOnce you call back an edited number, this unitcan automatically edit incoming phone numbersfrom the same area code each time you receivea call. For example, it can ignore the area code ofcalls originating from your area code, so that youcan call these numbers using caller informationwithout dialing the area code.To activate this feature, you must edit a callerinformation by selecting pattern 1, 2 or 3(page 41, 42), then make a call to that number.After that, calls from numbers in that area codewill be edited automatically. The handset andbase unit can remember up to 4 area codes eachto be edited according to patterns 1 and 2.When more than 5 area codes are edited, olderarea codes are reset to pattern 3. Phonenumbers from the 4 most recently edited areacodes will be automatically edited.This feature can be turned ON using either thehandset or the base unit. The default setting isON.3.10.1 Turning ON the Caller IDnumber auto edit featureL Keep the front cover page open for buttonlocations.With the handsetMake sure the handset is not being used.1 Press {MENU}.2 Press {0}{4}.L “Auto edit” will be displayed.3 Press {1} to select “On”.4 Press the {Save} (soft key).5 Press {OFF}.With the base unit1 Press {MENU}.2 Press {#}, then {7}{5}.3 Press {1} to select “ON”.4 Press {SET}.5 Press {MENU}.Note:L If you fail to reach your destination whenmaking a call, the phone number you dialedmight have an incorrect pattern. Edit the