Panasonic KX-FPG379 Operating Instructions Manual

Contents

Panasonic KX-FPG379 Operating Instructions Manual Manual pdf 66 page image

7. Answering Machine647.5.2 Remote operation usingremote commands{1} Repeat (During playback)L The current message is repeated.L If pressed within 5 seconds of playback, theprevious message will be played.{2} Skip (During playback)L The current message is skipped. The nextmessage is played.{4} New message playbackL Only new messages are played back.{5} All message playbackL All messages are played back.{6} Room monitorL The unit will monitor the sound for about 30seconds in the room.L After 30 seconds, a beep will sound. Tocontinue monitoring, press {6} again within10 seconds.{7} Record greeting messageL After the long beep, talk for up to 16 seconds.Press {9} to end. The new greeting messagewill be played back.{*}{4} To erase a specific message (Duringplayback)L The current message is erased.L A long beep will sound and the next messagewill be played.{*}{5} To erase all messagesL A long beep will sound and all messages willbe erased.{8}{0} To turn OFF the answering machineL The unit hangs up and will not answer callsuntil turned ON again (page 52, 64).{#} To skip the greeting messageL The greeting message is skipped.Turning message transfer ON or OFFYou must program a transfer telephone numberbeforehand (feature #60 on page 72).L Press {8}{1} to turn ON the messagetransfer.L Press {8}{2} to turn OFF the messagetransfer.Turning pager call ON or OFFYou must program a pager number beforehand(feature #70 on page 73).L Press {8}{3} to turn ON the pager call.L Press {8}{4} to turn OFF the pager call.Recording a marker messageAfter playing back the messages, you can leavean additional message.1. Wait for the voice guide.Voice guide:“All messages have been played.”2. Wait about 10 seconds.Voice guide:“Please leave your name and message afterthe beep.”3. Leave a message after the beep.To turn ON the AUTO ANSWER mode1. Call your unit and let it ring 10 rings.L The answering machine will temporarilyanswer the call.2. Enter the remote operation ID during thegreeting message.L A long beep will sound, and the receivingmode will be set to TAM/FAX.3. Hang up the handset.